Hardware Features

The RUCKUS ICX 7550 offers the following hardware features and capabilities:

  • Equipped with RJ-45 ports with 1000BASE-T/Multi-GiG Ethernet for downlink ports
  • Equipped with SFP and SFP+ for downlink ports
  • Supports two stacking ports with 40 Gbps or 100 Gbps
  • Supports 1-GbE out-of-band management Ethernet port
  • QSFP28 ports supporting 100-GbE and 40-GbE transceivers, including support for 4x25-GbE and 4x10-GbE breakout transceivers beginning with FastIron release 09.0.00.
    Bill - Is this bullet item and the note below correct for the 7550?
    Note: In the case of 4x10 breakout, links might come up on the peer side if you merely insert the breakout cable on both sides (without configuring breakout). If this occurs, you should still perform the breakout configuration.
  • Flexible and high switching bandwidth
  • On-chip packet buffer memory with dynamic buffer management for maximum burst absorption
  • Supports Jumbo Frame up to 12288 bytes
  • Contains learned and programmed MAC addresses; indicates destination port and additional properties of each MAC address
  • Store-and-forward transmission to remove bad packets from the network
  • Swappable redundant power supplies
  • Swappable fan assemblies
  • Supports uplink port slot modules
  • Standard 1U chassis height
  • 17-inch rack mountable

Switch Model and Corresponding I/O Port Configurations

Switch Model Downlink Ports PoE Ports Max PoE Power Per Port Up Link Ports Stacking Ports
ICX 7550-24 24x1 GbE RJ-45 N/A N/A 4x10 GbE SFP, 2x 40 GbE QSFP 2x40 Gbps QSFP
ICX 7550-24F 24x10 GbE SFP plus N/A N/A 4X25GbE SFP, 4x10 GbE SFP, 2x40 GbE QSFP, 1x100 GbE QSFP 2x100 Gbps zQSFP
ICX 7550-24P 24x1 GbE RJ45 24 45W 4x10 GbE SFP, 2x40 GbE QSFP 2x40 Gbps QSFP
ICX 7550-24XZP 24x10 GbE RJ45 24 90W 4X25GbE SFP, 4x10 GbE SFP, 2x40 GbE QSFP, 1x100 GbE QSFP 2x40/100 Gbps QSFP
ICX 7550-24ZP 12x2.5 GbE + 12x10 GbE RJ45 24 95W 4X25GbE SFP, 4x10 GbE SFP, 2x40 GbE QSFP, 1x100 GbE QSFP 2x100 Gbps zQSFP
ICX 7550-48 48x1 GbE RJ45 N/A N/A 4x10 GbE SFP, 2x40 GbE QSFP 2x40 Gbps QSFP
ICX 7550-48P 48x1 GbE RJ45 48 45W 4x10 GbE SFP, 2x40 GbE QSFP 2x40 Gbps QSFP
ICX 7550-48ZP 36x2.5 GbE + 12x10 GbE RJ45 48 95W 4X25GbE SFP, 4x10 GbE SFP, 2x40 GbE QSFP, 1x100 GbE QSFP 2x100 Gbps zQSFP
ICX 7550-48F 36x1G SFP + 12x10 GbE SFP plus N/A N/A 4X25GbE SFP , 4x10 GbE SFP, 2x40 GbE QSFP, 1x100 GbE QSFP 2x100 Gbps zQSFP

Switch Model and Corresponding PoE Support

Model VAC (V) #PSU Max PoE output power draw (W) Maximum Number of Ports Supported
802.3af/at/bt Class 3 802.3at/bt Class 4 PoE overdrive 802.3bt Class 5 802.3bt Class 6 802.3bt Class 7 802.3bt Class 8 PoH
2-Pair 2-Pair 2-Pair 4-Pair 4-Pair 4-Pair 4-Pair 4-Pair
15.4W 30W 45W 45W 60W 75W 90W 95W
ICX 7550-24P 100 - 180 2 1624 24 24 24          
181 - 240 1 950 24 24 21          
2 1900 24 24 24          
ICX 7550-24ZP 100 - 180 1 815 24 24 18 18 13 10 9 8
2 1630 24 24 24 24 24 21 18 17
181 - 240 1 954 24 24 21 21 15 12 10 10
2 1908 24 24 24 24 24 24 21 20
ICX 7550-24XZP 100 - 180 1 763 24 24 16 16 12 10 8 8
181 - 240 2 1526 24 24 24 24 24 20 16 16
100 -180 1 929 24 24 20 20 15 12 10 9
181 - 240 2 1858 24 24 24 24 24 24 20 19
ICX 7550-48P 100 - 180 1 812 48 27 18          
2 1624 48 48 36          
181 - 240 1 950 48 31 21          
2 1900 48 48 42          
ICX 7550-48ZP 100 - 180 1 763 48 25 16 16 12 10 8 8
2 1526 48 48 33 33 25 20 16 16
181 - 240 1 929 48 30 20 20 15 12 10 9
2 1858 48 48 41 41 30 24 20 19
Parent topic: Device Overview