ICX 7550 Stacking Topologies
The following figures show available ICX 7550 stacking ports on the front panel. The model shown is an ICX 7550-48F. Although the front-panel port configuration varies among ICX 7550 models, all ICX 7550 models stack from Module 2, as shown.
Available front panel stacking ports are 1/2/1 and 1/2/2. These two ports form the ICX 7550 valid-stack-port set.
The following figure shows an ICX 7550-48F linear stack.
The following figure shows an ICX 7550-48F ring stack.
ICX 7550 Two-Unit Stack with Linear-Topology Trunk
The following figure depicts an ICX 7550-48F two-unit stack with a linear-topology trunk. This is the only form of stacking trunk available for ICX 7550 devices. For more information, refer to Configuring Two-unit Stack Linear-topology Trunks.
The following figure depicts an ICX 7550-48F two-unit stack with a linear-topology trunk. This is the only form of stacking trunk available for ICX 7550 devices. For more information, refer to the "Configuring Two-unit Stack Linear-topology Trunks" section of the RUCKUS FastIron Stacking Configuration Guide.
