Flush-Front Mounting the Device in a Rack

Caution: The device must be turned off and disconnected from the network during this procedure.
Note: Illustrations in these rack installation procedures are for reference only and may not show the actual device that you are installing.

Complete the following tasks to install the device in a four-post rack:

  1. Attaching the front brackets
  2. Attaching the bracket extensions to the device
  3. Installing the device in the rack
  4. Attaching the rear brackets to the extensions
  5. Attaching the rear brackets to the rack posts

In this section:

  1. Attaching the Front Brackets
  2. Attaching the Bracket Extensions to the Device
  3. Installing the Device in the Rack
  4. Attaching the Rear Brackets to the Extensions
  5. Attaching the Rear Brackets to the Rack Posts
Parent topic: Installing the 1U, 1.5U, and 2U Universal Kit for Four-Post Racks (XBR-R000295)