Configuring the share level for an ingress buffer profile

Follow these steps to configure the share level for an ingress buffer profile.
The share level is the maximum number of buffers that a priority group (PG) can use as a portion of the of the total sharing pool.
Note: Configuration of the ingress buffer share level is supported only on RUCKUSICX 7250, ICX 7450, and ICX 7850 devices.
  1. Enter global configuration mode. 
    device# configure terminal
  2. Configure the share level. 
    device(config)# qos ingress-buffer-profile prof1 priority-group 0 xoff level6-1/3
  3. Return to privileged EXEC mode. 
    device(config)# exit
  4. Verify the configuration 
    device# show qos ingress-buffer-profile prof1
Ingress Buffer Profile: prof1
Ports attached:  --
Per PG Details:  XOFF Level:
PG 0                     level6-1/3
PG 1                     level1-1/64
PG 2                     level2-1/32
PG 3                     level2-1/32
  5. Save the configuration. 
    device# write memory

Ingress buffer profile configuration example

device# configure terminal
device(config)# qos ingress-buffer-profile prof1 priority-group 0 xoff level6-1/3
device(config)# exit
device# show qos ingress-buffer-profile prof1
device# write memory
Parent topic: Configuring QoS