sFlow Configuration Considerations

Following are the sFlow configuration considerations on RUCKUS ICX devices:

  • On ICX devices, you can use QoS queue 1 for priority traffic, even when sFlow is enabled on the port.
  • If ICX stacks are rebooted, sFlow is disabled on standby and member units until the configuration is synchronized between the active and standby Controllers.
  • sFlow is not supported on PE ports on 802.1BR-enabled RUCKUS ICX devices.

In this section:

  1. sFlow and Hardware Support
  2. sFlow and CPU Utilization
  3. sFlow and Agent Address
  4. sFlow and Source IP Address
    When the sFlow packet is sent to the sFlow collector, by default, the IP address of the outgoing interface is used in the sFlow datagram.
  5. sFlow Source IP Address Configuration Notes
  6. sFlow and Source Port
  7. sFlow and Sampling Rate
  8. sFlow and Port Monitoring
Parent topic: sFlow Overview