Disabling Ports Within a LAG

You can disable an individual port within a LAG using the disable command within the LAG configuration mode.

  1. Enter the global configuration mode. 
    device# configure terminal
  2. Create a LAG. 
    device(config)# lag blue dynamic id 11
  3. Add ports to the LAG. 
    device(config-lag-blue)# ports ethernet 1/3/1 ethernet 1/3/2
  4. Disable an individual port. 
    device(config-lag-blue)# disable ethernet 1/3/1
    To disable a port belonging to a keep-alive LAG, you must disable it from the interface configuration level as displayed in the following example.
    device(config-lag-test)# interface ethernet 1/7/8
device(config-if-e1000-1/7/8)# disable
device(config-if-e1000-1/7/8)#
Parent topic: Configuring a LAG