`destination-ip`

Sets the destination IP address of an ERSPAN mirror.

Syntax

destination-ip ip-addr

no destination-ip ip-addr

Command Default

A destination IP is not configured for the ERSPAN profile.

Parameters

Modes

Monitor profile mode

Usage Guidelines

The destination IP address is the IP address for the remote host that is collecting the mirrored traffic, not the switch.

The no form of the command removes the IP address from the monitor profile.

Examples

The following example sets the destination IP address in ERSPAN profile 3.

device(config)# monitor-profile 3 type ERSPAN
device(config-monitor-profile 3)# destination-ip 1.1.1.1
device(config-monitor-profile 3)# exit

History

Release version	Command history
08.0.40	This command was introduced.

destination-ip