lbs-service

Syntax
lbs-service name

After the lbs-service command is entered to enable the Location Services (SPoT) configuration mode, the following configuration syntax is available:

[host host-ip-address |password pwd | port port-number|venue venue name]
Command Default

The Location Services (SPoT) settings are not configured.

Parameters
name
Specifies an Location Services (SPoT) name.
host ip-address
Sets the LBS server host IP address.
password pwd
Sets the LBS server password.
port port-num
Sets the LBS server port number.
venue name
Sets the LBS venue name.
Modes

Global configuration mode

Usage Guidelines

This command is supported on all SmartZone platforms except SmartZone Data Plane controller. The default port number is 8883.

Examples

The following example shows how to configure various SPoT profile options. 

device# config
device(config)# lbs-service spot
device(config-lbs-service)# host 10.10.2.3
device(config-lbs-service)# password Jxyg123
device(config-lbs-service)# port 3
device(config-lbs-service)# venue spot
Parent topic: Commands J through N