Find Technical Content
  • Home
  • Ruckus Support Portal
  • Ruckus Networks
  • Table of Contents
  • Dark Mode

Powered by Titania Delivery

⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

Access Point Management

  • 1 Access Point Management
    • 1.1 AP Groups
      • 1.1.1 Working with AP Groups
      • 1.1.2 Creating an AP Group
    • 1.2 AP Provisioning and Swapping
      • 1.2.1 Working with AP Registration Rules
      • 1.2.2 Creating an AP Registration Rule
      • 1.2.3 Configuring Registration Rule Priorities
      • 1.2.4 Creating an AP MAC OUI Address
      • 1.2.5 Setting a Global Country Code
      • 1.2.6 Configuring the Tunnel UDP Port
      • 1.2.7 Provisioning and Swapping Access Points
      • 1.2.8 Options for Provisioning and Swapping APs
      • 1.2.9 Approving Access Points
      • 1.2.10 Approving Mesh APs
      • 1.2.11 Viewing Mesh APs
      • 1.2.12 ZD Migration
        • 1.2.12.1 ZoneDirector to SmartZone Migration
    • 1.3 Working with Access Points
      • 1.3.1 Moving a Single Access Point to a Different Zone
      • 1.3.2 AP Switchover
        • 1.3.2.1 Configuring AP Switchover
        • 1.3.2.2 Switch Over Managed APs and External DPs
      • 1.3.3 Rehoming Managed APs
        • 1.3.3.1 AP Auto Rehome
      • 1.3.4 Rebalancing APs
      • 1.3.5 Configuring Node Affinity
        • 1.3.5.1 Enabling Node Affinity
        • 1.3.5.2 Disabling Node Affinity
      • 1.3.6 Triggering a Preferred Node
    • 1.4 Configuring Access Points
      • 1.4.1 Configuring Access Points
      • 1.4.2 Access Point and Zone Configuration Options
        • 1.4.2.1 General Options
        • 1.4.2.2 Mesh Options
        • 1.4.2.3 Band Combination Options
        • 1.4.2.4 Band/Spectrum Configuration
        • 1.4.2.5 AP GRE Tunnel Options
        • 1.4.2.6 Syslog Options
        • 1.4.2.7 AP SNMP Options
        • 1.4.2.8 Cellular Options
        • 1.4.2.9 Advanced Options
      • 1.4.3 Power Source in AP Configuration
      • 1.4.4 Swap Configuration
        • 1.4.4.1 Editing Swap Configuration
      • 1.4.5 AP CLI Scripts
        • 1.4.5.1 AP CLI Scripts
        • 1.4.5.2 Uploading AP CLI Scripts
        • 1.4.5.3 Executing AP CLI Scripts
        • 1.4.5.4 Scheduling AP CLI Scripts
        • 1.4.5.5 Viewing Scripts
        • 1.4.5.6 Viewing the Script Execution Summary
    • 1.5 AP Model Specific Configuration
      • 1.5.1 AP Model Specific Configuration
      • 1.5.2 Configuring Model-Based Settings
      • 1.5.3 Configuring the Port Settings of a Particular AP Model
      • 1.5.4 AP Ethernet Ports
        • 1.5.4.1 Creating an Ethernet Port Profile
        • 1.5.4.2 Designating an Ethernet Port Type
        • 1.5.4.3 Access Ports
        • 1.5.4.4 Trunk Ports
        • 1.5.4.5 General Ports
      • 1.5.5 Link Aggregration Protocol (LACP)
        • 1.5.5.1 Link Aggregation Control Protocol (LACP) support for R720 AP
        • 1.5.5.2 Enabling the LACP Support for a Zone
        • 1.5.5.3 Enabling LACP Support for an AP
        • 1.5.5.4 Enabling LACP Support for an AP Group
          • 1.5.5.4.1 Creating a Bond Port Profile
    • 1.6 Radio Band Features
      • 1.6.1 Band or Spectrum Configuration
      • 1.6.2 Auto Cell Sizing
      • 1.6.3 ChannelFly and Background Scanning
      • 1.6.4 BSS Coloring
      • 1.6.5 Band Balancing
      • 1.6.6 Client Load Balancing
      • 1.6.7 Automated Frequency Coordination System
        • 1.6.7.1 AFC Power Modes
        • 1.6.7.2 RUCKUS AFC System Architecture
        • 1.6.7.3 How RUCKUS AP Geolocation Works
        • 1.6.7.4 Mobile Applications
        • 1.6.7.5 Enabling Automated Frequency Coordination from SmartZone
        • 1.6.7.6 Checking Automated Frequency Coordination Status
    • 1.7 AP Services
      • 1.7.1 DHCP & NAT
        • 1.7.1.1 AP Based DHCP or NAT
        • 1.7.1.2 Network Topology
        • 1.7.1.3 Hierarchical Network Topology
        • 1.7.1.4 Configuring AP-based DHCP Service Settings
        • 1.7.1.5 Creating an AP DHCP Pool
        • 1.7.1.6 Configuring DHCP Server or NAT Router with Mesh Options
      • 1.7.2 Domain Name System (DNS)
        • 1.7.2.1 Creating a DNS Server Profile
        • 1.7.2.2 Creating a DNS Spoofing Profile
      • 1.7.3 Managing AP Certificates
      • 1.7.4 Restricted Access Overview
    • 1.8 AP Status
      • 1.8.1 AP Status
      • 1.8.2 SCI Thresholds for each AP
      • 1.8.3 Monitoring the Network
      • 1.8.4 Viewing Managed Access Points
      • 1.8.5 Monitoring Access Points
      • 1.8.6 Viewing General AP Information
      • 1.8.7 Viewing LLDP Neighbors
        • 1.8.7.1 Supported LLDP Attributes
      • 1.8.8 Tagging Critical APs
      • 1.8.9 Working with Maps
        • 1.8.9.1 Importing a Floorplan Map
        • 1.8.9.2 Viewing RF Signal Strength
        • 1.8.9.3 Monitoring APs Using the Map View
      • 1.8.10 Viewing AP Health Indicators
      • 1.8.11 Health
        • 1.8.11.1 Health
          • 1.8.11.1.1 Understanding Cluster and AP Health Icons
          • 1.8.11.1.2 Customizing Health Status Thresholds
            • 1.8.11.1.2.1 Customizing AP Flagged Status Thresholds
          • 1.8.11.1.3 Using the Health Dashboard Map
          • 1.8.11.1.4 Configuring the Google Map API Key Behavior
      • 1.8.12 Viewing AP Performance
      • 1.8.13 Viewing AP Connection Failures
      • 1.8.14 AP Traffic Indicators
        • 1.8.14.1 Viewing AP Traffic Indicators
        • 1.8.14.2 Traffic Analysis for Wireless Clients
        • 1.8.14.3 Customizing Traffic Analysis
        • 1.8.14.4 Configuring Traffic Analysis Display for APs
        • 1.8.14.5 SmartCell Insight Report on Actual Traffic Rate for APs and Client
      • 1.8.15 Neighbor APs
        • 1.8.15.1 Viewing Neighbor APs in a Non-Mesh Zone
      • 1.8.16 Reports
        • 1.8.16.1 Rogue Devices
          • 1.8.16.1.1 Viewing Rogue Devices
          • 1.8.16.1.2 Marking Rogue Access Points
          • 1.8.16.1.3 Locating a Rogue Device
        • 1.8.16.2 Historical AP Client Stats
          • 1.8.16.2.1 Viewing AP Client Statistics
      • 1.8.17 External Syslog Server
        • 1.8.17.1 External Syslog Server
    • 1.9 AP Wireless Clients
      • 1.9.1 AP Wireless Clients
      • 1.9.2 Wireless Clients
      • 1.9.3 Deauthorizing a Wireless Client
      • 1.9.4 Blocking a Wireless Client
      • 1.9.5 Unblocking a Wireless Client
      • 1.9.6 Disconnecting a Wireless Client
      • 1.9.7 Viewing a Summary of Wireless Clients
      • 1.9.8 Viewing Wireless Client Details
      • 1.9.9 Traffic Analysis for Wireless Clients
        • 1.9.9.1 Adjusting the Traffic Analysis Display for Top Clients
        • 1.9.9.2 SmartCell Insight Report on Actual Traffic Rate for APs and Client
    • 1.10 AP Wired Clients
      • 1.10.1 Wired Clients
      • 1.10.2 Viewing a Summary of Wired Clients
      • 1.10.3 Deauthorizing a Wired Client
    • 1.11 AP Upgrade
      • 1.11.1 AP Firmware Version
      • 1.11.2 Changing the AP Firmware Version of the Zone
      • 1.11.3 Scheduling a Zone Firmware Upgrade
      • 1.11.4 Uploading an AP Patch File
      • 1.11.5 Troubleshooting with AP Firmware Files
      • 1.11.6 Secure Boot

Rogue Devices

In this section:

  1. Viewing Rogue Devices
  2. Marking Rogue Access Points
    To mark a rogue (or unauthorized) Access Point as known.
  3. Locating a Rogue Device
    The administrator can identify the estimated location area of a rogue AP or rogue client on a map. Managed APs that detect the rogue APs and rogue clients are also visible on the map.
Parent topic: Reports

Did you find what you were looking for?

Thanks!

Ruckus Wireless

© 2026 Ruckus Wireless LLC All rights reserved.

  • Accessibility
  • Privacy & Cookies
  • Do Not Sell My Information
  • Trademarks
  • Terms
  • Feedback