New in This Document
- Feature Column
The Feature column shows the name of each new, updated, or deleted feature in a separate row.
- Description Column
The Description column shows a brief description of the new, updated, or deleted feature.
The Description need not be too lengthy. Begin each description with the notation New, Updated, or Deleted before including a description of the feature or change.
- Reference Column
The Reference column shows a cross-reference (live link whenever possible) to the appropriate section in the document.
Key Features and Enhancements in RUCKUS Network Director 4.5.0.56
| Feature | Description | Reference |
|---|---|---|
| Firewall Policy and Security Enhancements | Updated: Firewall policy has been updated to enhance security. Inbound firewall rules have been refined to allow only essential service ports and restrict access to trusted IP addresses. All other inbound traffic is denied by default. Outbound traffic remains unrestricted, with the policy focused on securing inbound and inter-node communication. | Network Considerations |
Key Features and Enhancements in RUCKUS Network Director 4.5.0.34
| Feature | Description | Reference |
|---|---|---|
| Network Reset Functionality | New: Allows you to reset and reconfigure network settings, including IP address, subnet mask, gateway, DNS, and IP assignment method (static or DHCP), after the system has been installed and is operational. This functionality is available through the CLI and enables post-installation network updates without requiring system reinstallation or external manual configuration. This feature is supported only in single-node deployments. | Resetting the Network |
Key Features and Enhancements in RUCKUS Network Director 4.5.0.32
| Feature | Description | Reference |
|---|---|---|
| Firewall Ports | New: Added details of the ports required to support Geo Redundancy synchronization and SNMP functionality for RND. | Network Considerations |
Key Features and Enhancements in RUCKUS Network Director 4.5.0.22
| Feature | Description | Reference |
|---|---|---|
| Editorial updates and corrections | Updated: Editorial corrections were made throughout the guide. | Throughout the guide |
Key Features and Enhancements in RUCKUS Network Director 4.5
| Feature | Description | Reference |
|---|---|---|
| Minor editorial updates | Minor editorial updates were made. | Throughout the Guide |
There must be some indication of what has been updated in the released document because there must be some form of change that requires the republication of the document. For documents in which there are no new features or only minor changes, some mention of updates to the guide should be included in the table. For example, some forms of general updates could be listed in the following ways:
- Editorial updates and corrections
- Addressing reported defects
- Unsupported software
- Unsupported hardware
- Unsupported feature
The reference to these types of changes could be “Throughout the guide” or “References have been removed throughout the guide.” The goal is to indicate that the change or deletion has occurred throughout the document.
Use the New In This Document topic in the following situations:
The New in This Document section normally appears in the About This Document chapter.
The Key Features and Enhancements table is the main feature of the New in This Document section.
The table title includes the release number (and version number if warranted) and the publication date of the document, as shown in the following example.