Activating and Editing the Beacon as a Service Plugin (iBeacon, Eddystone and Custom)

The RUCKUS IoT Controller supports the Bluetooth Low Energy (BLE) beaconing service, enabling an Access Point (AP) to transmit beacons that can be used for various purposes such as wayfinding. Additionally, the AP can transmit different types of beacons based on the selected configuration.
To establish a connection to a vendor infrastructure, the administrator must perform the following steps.
  1. From the main menu, click Admin.
  2. In the left navigation pane, click Plugins.
  3. In the Select a Plugin to Activate list, select the Beacon as a Service plugin and click Activate.

    Activating the Beacon as a Service Plugin

    Activating the Beacon as a Service Plugin (iBeacon)

    Activating Beacon as a Service (Eddystone)

    Activating Beacon as Service (Generic)

  4. After the Beacon as Service plugin is activated, enter the following configuration parameters.
    1. In the Beacon Type list, select the type of beacon.
    2. Provide relevant values for given fields based on Beacon Type. For iBeacon, a common 32 characters UUID can be given which will be applied to all APs. If Append AP MAC is checked, Controller will append 12 characters of AP MAC at the end of 20 characters UUID, so that it will be unique for every AP data.
    3. For Advertisement Interval, set the time interval to send the advertisement packets. The advertisement interval ranges from 100 through 1000 milliseconds. The default interval is 100 milliseconds.
  5. Click Apply.
    The Beacon as a Service plugin is added in the Active Plugin List.
  6. (Optional) To deactivate the Beacon as a Service plugin, select it and click Deactivate.

    Deactivating the Beacon as a Service Plugin

  7. (Optional) To edit the configuration of the Beacon as a Service plugin, select it and click Update.

    Updating the Configuration Parameters (iBeacon)

    Updating Configuration parameters (Eddystone)

    Updating Configuration Parameters (Generic)