Building a Stack

• 1 Building a Stack
  • 1.1 Stack Construction Methods
    • 1.1.1 ID Assignment for New Units
    • 1.1.2 The Stack Interactive-setup Utility
    • 1.1.3 Scenario 1 - Using Stack Interactive-setup to Create a Stack
      • 1.1.3.1 Auto-trunking New Links or Converting a Linear Stack to a Ring with Stack Interactive-setup
      • 1.1.3.2 Changing Stack Unit IDs with Stack Interactive-setup
    • 1.1.4 Scenario 2 - Using Zero-touch Provisioning to Configure a Stack
      • 1.1.4.1 Zero-touch Provisioning Example of New Link and New Unit Discovery
    • 1.1.5 Scenario 3 - Manually Configuring a Three-member Stack in a Ring Topology
  • 1.2 Configuring Two-unit Stack Linear-topology Trunks
    • 1.2.1 Building a Two-unit Linear-topology Trunk Manually
    • 1.2.2 Building a Two-unit Stack with a Linear-topology Trunk Using Stack Interactive-setup
    • 1.2.3 Creating a Two-unit Linear-topology Stack Using Stack Zero-touch Provisioning
    • 1.2.4 Changing a Live Two-unit Stack to a Linear-topology Trunk
    • 1.2.5 Changing a Live Linear-topology Trunk to a Ring
  • 1.3 Verifying a Stack Configuration
  • 1.4 Displaying Information on Stack Connections