Displaying information about ACLs
You can display information about the currently active user-defined and dynamically applied ACLs.
Displaying user-defined ACLs
To display the user-defined IP ACLs active on the device, enter the following command.
device# show dot1x ip-ACL Port 1/3 (User defined IP ACLs): Extended IP access list Port_1/3_E_IN permit udp any any
Displaying dynamically applied ACLs
To display the dynamically applied IP ACLs that are active on an interface, enter a command such as the following.
device# show dot1x ip-acl ethernet 1/1/15
-------------------------------------------------------------------
Port MAC Inbound Outbound Inbound Outbound
Addr IPv4 ACL IPv4 ACL IPv6 ACL IPv6 ACL
-------------------------------------------------------------------
1/1/15 0180.c200.0003 10 11 20 21
1/1/15 0180.c300.0005 100 101 120 121