Displaying configuration of 802.1X ports

The output of the show dot1x configuration command indicates the configuration details of 802.1X ports.

To display the configuration details of 802.1X ports globally on the device, enter the show dot1x configuration command.

device# show dot1x configuration 
PAE Capability                 : Authenticator Only
Status                         : Enabled
Auth Order                     : mac-auth dot1x
Default VLAN                   : 2
Restricted VLAN                : 4
Critical VLAN                  : 3
Guest VLAN                     : 5
Action on Auth failure         : Move to Restricted VLAN (4)
MAC Session Aging              : Enabled
Filter Strict Security         : Enabled
Re-authentication              : Disabled
Session max sw-age             : 120 seconds
Session max hw-age             : 70 seconds
Quiet-period                   : 60 seconds
TX-period                      : 30 seconds
Reauth-period                  : 60 seconds
Supplicant-timeout             : 30 seconds
Max Reauth requests            : 2
Protocol Version               : 1
Mixed-STK#

To display the configuration details of 802.1X ports on an interface, enter a command such as the following.

device# show dot1x configuration ethernet 1/1/1
Port 1/1/1 Configuration: 
Port-Control                   : control-auto
Auth Order                     : mac-auth dot1x
Action on Auth failure         : Move to Restricted VLAN (4)
Action on Auth timeout         : Treat as a failed authentication
Action on Voice timeout        : Treat as a failed authentication
Filter Strict Security         : Enabled
DoS Protection                 : Disabled (limit = 512)
Source-guard Protection        : Disabled
Reauth-timeout                 : 60 seconds
Aging                          : Enabled
Max-sessions                   : 4