Displaying the Image Versions Installed in Flash Memory
You can view the boot and flash images installed on the device, as well as the boot image running on the device, as outlined in the following example.
device> show flash Active Management Module (Slot 9): Compressed Pri Code size = 3613675, Version 03.1.00aT3e3 (sxr03100a.bin) Compressed Sec Code size = 2250218, Version 03.1.00aT3e1 (sxs03100a.bin) Compressed BootROM Code size = 524288, Version 03.0.01T3e5 Code Flash Free Space = 9699328 Standby Management Module (Slot 10): Compressed Pri Code size = 3613675, Version 03.1.00aT3e3 (sxr03100a.bin) Compressed Sec Code size = 2250218, Version 03.1.00aT3e1 (sxs03100a.bin) Compressed BootROM Code size = 524288, Version 03.0.01T3e5 Code Flash Free Space = 524288
The following information is displayed in the output:
- The "Compressed Pri Code size" line lists the flash code version installed in the primary flash area.
- The "Compressed Sec Code size" line lists the flash code version installed in the secondary flash area.
- The "Boot Monitor Image size" line lists the boot code version installed in flash memory. The device does not have separate primary and secondary flash areas for the boot image. The flash memory module contains only one boot image.
Note: To minimize the boot-monitor image size on
FastIron devices, the
ping and
tftp operations performed in the boot-monitor mode are restricted to copper ports on the
FastIron Chassis management modules and to the out-of-band management port on the
FastIron stackable switches. The other copper or fiber ports on these devices do not have
the ability to ping or tftp from the boot-monitor mode.
Refer to the RUCKUS FastIron Command Reference for more information.