New in This Document

The following table describes changes to this guide for all FastIron 09.0.10 releases.

Summary of Enhancements in FastIron Release 09.0.10h

Feature

Description

Reference

check the wording on this feature
Software behavior change when an ICX device is connected to RUCKUS One or SmartZone
Check the wording of this description
Disabling web-managment when RUCKUS One or SmartZone is connected

Refer to Enabling an ICX Device to Be Managed by SmartZone for rmore information.

Refer to Connect the Switch to RUCKUS One for rmore information.
Updates to address defects Minor updates on content throughout to address defects. All chapters.
Minor editorial updates Minor editorial updates were made throughout the Configuration Guide. All chapters.

Summary of Enhancements in FastIron Release 09.0.10e

Feature Description Reference
ICX Management in the RUCKUS Cloud via HTTPs This release adds support for HTTPs-based ICX management in the RUCKUS Cloud. ICX-Management in RUCKUS One
Remote Access using SNMP The ACL options that come under the snmp-server community, snmp-server group, and snmp-server access commands have been deprecated. Instead, use the snmp-server keyword that has been introduced in the management access command to allow or deny the incoming SNMP server traffic for the specified IP address or addresses. Configuring Remote Access for SNMP
SNMP functionality

The functionality of snmp-server community command with the keyword "view" is not supported. This is fixed in the later releases.

 Adding an SNMP Community String
Updates to address defects Minor updates on content throughout to address defects. All chapters.
Minor editorial updates Minor editorial updates were made throughout the Configuration Guide. All chapters.

Note: FastIron releases 09.0.00, 09.0.00a, and 09.0.10 are no longer available for download due to the discovery of a critical defect.

 

This is a protected line.

Refer to TSB 2022-001 – FastIron 09.0.00 and 09.0.10 - Risk of Filesystem Corruption on the Technical Support Bulletins page for more details.

This is a protected line.
 

RUCKUS recommends upgrading to FastIron release 09.0.10a or later for all ICX switches currently running any of the afore-mentioned releases.

This is a protected line.
 

All the software features supported in FastIron release 09.0.00, 09.0.00a, and 09.0.10 remain available and supported in FastIron release 09.0.10a and later releases unless specifically noted.

This is a protected line.
 

For completeness, the feature descriptions for all changes introduced in the unavailable releases; that is, FastIron 09.0.00, 09.0.00a, and 09.0.10, are included in this section.

Summary of Enhancements in FastIron Release 09.0.10d

Feature Description Reference
Configuration Archive Auto-revert New functionality has been added for the auto-revert feature. Enabling Configuration Archive Auto-Revert
Configuring the Banner MOTD Update for configuring from SmartZone. Configuring the CLI Banner

Summary of Enhancements in FastIron Release 09.0.10a

Feature Description Reference
Configuration Archive Auto-revert The Configuration Archive Auto-revert feature provides the capability to revert or rollback to a previous configuration if the changed running configuration is not saved to the non-volatile memory within a pre-defined time. This prevents the system from entering an unknown state by reminding the system administrator that the running configuration has changed and these configurations have not been saved. If the write memory command is not used after the reminder is issued, the system can reload automatically using the golden archive that has been previously configured.
Configuration Archive size enhancement The configuration archive file size is increased from 20 to 100 Managing Configuration Archive Files
ICX-Management Configurable Custom Port The manager ssh-port command allows you to specify a port for connecting to SmartZone. Configuring a Custom Port Number for Connection to SmartZone
Precision Time Protocol (PTP) and Transparent Clock Adds support for ICX 7150-48ZP model. Precision Time Protocol
1G Breakout 1G Breakout enables the configuration of 1G speed on 10G breakout ports dynamically without performing reload. 1G Breakout does not mandate all the ports to be configured at the same speed, so that each port can work according to the configured speed setting (10G/1G speed). 1G Breakout Ports
Secure Wipe The secure wipe feature securely erases the flash contents permanently so that contents cannot be retrieved after erase. This is primarily used for data sanitization. Secure Wipe
Precision Time Protocol (PTP) and Transparent Clock Adds support for ICX 7850 and ICX 7150 models. Refer to Precision Time Protocol for more information.
Overview of Breakout Ports A 40 Gbps breakout cable can be used on ICX 7750 standalone units and 100/40 Gbps cable can be used on ICX 7850 and ICX 7550 standalone units to break out certain 40 Gbps ports into four 10 Gbps sub-ports and 100 Gbps ports into four 25 Gbps sub-ports respectively. Refer to Overview of Breakout Ports for more information.
Remote Access The management access command has been introduced for remote access to ICX devices. ACLs are no longer used in conjunction with management access protocols. Refer to Remote Access to the Switch for more information.
Configuration Archive ICX switches and routers can now manage multiple configuration files in flash, providing the flexibility to save multiple configuration files and to change the system configuration when needed. Refer to Configuration Archives for more information.
Password and Device Recovery There are different options available if you have problems logging in after upgrading to FastIron 09.0.00 from a pervious release. Refer to Password and Device Recovery

Unsupported hardware

This release and future releases do not support ICX 7750 devices.

References have been removed throughout the guide.
Unsupported feature This release and future releases do not support Campus Fabric (SPX). References have been removed throughout the guide.
Unsupported feature This release does not support ICX-Management from SmartZone or ICX Cloud Management. Support for these features will be added in the FastIron release 09.0.10. Related chapters have been removed from this guide.
Updates to address defects Minor updates on content throughout to address defects. All chapters.

Minor editorial updates

Minor editorial updates were made throughout the Configuration Guide.

All chapters.

Parent topic: About This Document