Configuring IPv6 ND Proxy Globally

IPv6 ND proxy in global configuration mode enables all the interfaces on the router.
  1. Enter global configuration mode.
    Router# configure terminal
  2. Enable the forwarding of IPv6 traffic globally.
    Router(config)# ipv6 unicast-routing 
  3. Configure IPv6 ND proxy in global configuration mode.
    Router(config)# ipv6 nd proxy 
  4. Use the show ipv6 command to verify whether IPv6 ND proxy is enabled on the router.
    Router(config)# show ipv6 
              
               Global Settings
      unicast-routing disabled, hop-limit 64
      No Inbound Access List Set
      No Outbound Access List Set
      No IPv6 DNS Server Address set
      Prefix-based IPv6 Load-sharing is Enabled, Number of load share paths: 4 
      nd proxy enabled
     

The following example configures IPv6 ND proxy on an IPv6 enabled router.

Router# configure terminal
Router(config)# ipv6 unicast-routing
Router(config)# ipv6 nd proxy