Creating a Static IGMP Group
You can configure one or more physical ports to be a permanent (static) member of an IGMP group based on the range or count. You can specify a count from 2 through 256 and up to 255 IP addresses in the range.
The following example configures two static groups starting from 226.0.0.1 using the count option.
device(config)# interface ethernet 1/1/5 device(config-if-e1000-1/1/5)# ip igmp static-group 226.0.0.1 count 2
The following example configures two static groups starting from 226.0.0.1 using the range of IP addresses option.
device(config)# interface ethernet 1/1/5 device(config-if-e1000-1/1/5)# ip igmp static-group 226.0.0.1 to 226.0.0.2
The following example configures two static groups on virtual ports starting from 226.0.0.1 using the count option.
device(config)# interface ethernet 1/1/5 device(config-if-e1000-1/1/5)# ip igmp static-group 226.0.0.1 count 2 ethernet 1/1/5
The following example configures two static groups on virtual ports starting from 226.0.0.1 using the range of IP addresses option.
device(config)# interface ve 10 device(config-vif-10)# ip igmp static-group 226.0.0.1 to 226.0.0.2 ethernet 1/1/5
The following example displays the existing
static IGMP groups, use the show ip igmp static command. The vrf keyword and vrf-name
variable are inserted after the igmp part of the command.
device# show ip igmp vrf eng static Group Address Interface Port List ----------------+---------+--------- 229.1.0.12 1/4/1 ethe 1/4/1 229.1.0.13 1/4/1 ethe 1/4/1 229.1.0.14 1/4/1 ethe 1/4/1 229.1.0.92 1/4/1 ethe 1/4/1