`clear webauth vlan`

Clears the authenticated hosts or the blocked hosts.

Syntax

clear webauth vlan vlan-id{ authenticated-mac | block-mac } [ mac-address ]

Parameters

vlan-id: Specifies the VLAN ID.
authenticated-mac: Clears authenticated hosts in a Web Authentication VLAN. If a MAC address is specified, then only that host is cleared. If a MAC address is not specified, then all the authenticated hosts are cleared.
block-mac: Clears the configured time duration users must wait before the next cycle of Web Authentication attempts is allowed. If a MAC address is specified, then only that host is unblocked. If no MAC address is specified, then all the hosts are unblocked.
mac-address: Specifies the MAC address of the host. When used with authenticated-mac keyword, this is the dynamically authenticated host MAC address and when used with the block-mac keyword, this is the blocked host MAC address.

Modes

Privileged EXEC mode

Global configuration mode

VLAN configuration mode

Web Authentication configuration mode

Examples

The following example clears all the authenticated hosts.

device# clear webauth vlan 10 authenticated-mac

The following example clears the host with MAC address 1111.2222.3333.

device# clear webauth vlan 10 authenticated-mac 1111.2222.3333

The following example unblocks an authenticated host.

device# clear webauth vlan 20 block-mac 1111.2222.3333

clear webauth vlan