Commands J, K, and L

• 1 Commands J, K, and L
  • 1.1 jitc enable
  • 1.2 jitc show
  • 1.3 jitter threshold
  • 1.4 jp-policy
  • 1.5 jumbo
  • 1.6 keep-alive-vlan
  • 1.7 keepalive
  • 1.8 keepalive (IKEv2)
  • 1.9 keychain
  • 1.10 keychain mka
  • 1.11 keychain tcp
  • 1.12 key-id
  • 1.13 key-rollover-interval
  • 1.14 key-server-priority
  • 1.15 kill
  • 1.16 lacp-mode
  • 1.17 lacp-timeout
  • 1.18 lag
  • 1.19 lag-mac
  • 1.20 learn-default
  • 1.21 lease
  • 1.22 lease-count
  • 1.23 led
  • 1.24 led mode
  • 1.25 legacy-inline-power
  • 1.26 legacy-inline-power (Interface)
  • 1.27 license delete perpetual
  • 1.28 license delete unit
  • 1.29 license install perpetual
  • 1.30 license set serial-number
  • 1.31 lifetime (IKEv2)
  • 1.33 link-config gig copper autoneg-control
  • 1.34 link-error-disable
  • 1.35 link-fault-signal
  • 1.36 link-keepalive ethernet
  • 1.37 link-keepalive interval
  • 1.38 link-keepalive retries
  • 1.39 linkdampen
  • 1.40 link-oam
  • 1.41 lldp advertise link-aggregation
  • 1.42 lldp advertise mac-phy-config-status
  • 1.43 lldp advertise management-address
  • 1.44 lldp advertise max-frame-size
  • 1.45 lldp advertise med-capabilities
  • 1.46 lldp advertise med-power-via-mdi
  • 1.47 lldp advertise port-description
  • 1.48 lldp advertise port-id-subtype
  • 1.49 lldp advertise port-vlan-id
  • 1.50 lldp advertise power-via-mdi
  • 1.51 lldp advertise system-capabilities
  • 1.52 lldp advertise system-description
  • 1.53 lldp advertise system-name
  • 1.54 lldp advertise vlan-name
  • 1.55 lldp-device
  • 1.56 lldp enable ports
  • 1.57 lldp enable receive
  • 1.58 lldp enable snmp med-topo-change-notifications
  • 1.59 lldp enable snmp notifications
  • 1.60 lldp enable transmit
  • 1.61 lldp max-neighbors-per-port
  • 1.62 lldp max-total-neighbors
  • 1.63 lldp med fast-start-repeat-count
  • 1.64 lldp med location-id civic-address
  • 1.65 lldp med location-id coordinate-based
  • 1.66 lldp med location-id ecs-elin
  • 1.67 lldp med network-policy application
  • 1.68 lldp reinit-delay
  • 1.69 lldp snmp-notification-interval
  • 1.70 lldp tagged-packets
  • 1.71 lldp transmit-delay
  • 1.72 lldp transmit-hold
  • 1.73 lldp transmit-interval
  • 1.74 load-balance symmetric
  • 1.75 local-as
  • 1.76 local-certificate (PKI)
  • 1.77 local-identifier
  • 1.78 local-userdb
  • 1.79 log (OSPFv2)
  • 1.80 log-status-change
  • 1.81 logging
  • 1.82 logging buffered
  • 1.83 logging cli-command
  • 1.84 logging console
  • 1.85 logging enable (ACL)
  • 1.86 logging enable (PKI)
  • 1.87 logging enable config-changed
  • 1.90 logging enable rfc5424
  • 1.91 logging enable tcp-ao
  • 1.92 logging enable user-login
  • 1.93 logging facility
  • 1.94 logging host
  • 1.95 logging on
  • 1.96 logging persistence
  • 1.97 logging-rate-limit
  • 1.98 login-page
  • 1.99 logmgr clear-fetched-logs
  • 1.100 logmgr fetch
  • 1.101 logmgr help
  • 1.102 logmgr hierarchy
  • 1.103 logmgr list
  • 1.104 logmgr monitor
  • 1.105 logmgr upload
  • 1.106 loop-detection
  • 1.107 loop-detection-interval
  • 1.108 loop-detection shutdown-disable
  • 1.109 loop-detection-syslog-interval
  • 1.110 lsdb-limit
  • 1.111 lsdb-overload-interval
  • 1.112 l2protocol dot1q-tunnel
  • 1.113 l2protocol dot1q-tunnel cos
  • 1.114 l2protocol dot1q-tunnel drop-threshold
  • 1.115 l2protocol dot1q-tunnel-mac
  • 1.116 l2protocol dot1q-tunnel shutdown-threshold
  • 1.117 l2vpn evpn