New in This Document

Information has been added or updated to reflect new FastIron features or enhancements to existing FastIron features.

For commands introduced since Release 08.0.01, a history table is included with each command to provide details about the modifications to that command. For commands introduced prior to Release 08.0.01, a history table is not provided, unless the command has been modified in recent releases.

Note: In addition to commands that are new or modified for this release, commands for existing FastIron features may have been added that were previously described only in FastIron configuration guides.

New Commands for FastIron 10.0.20b_cd6

The following command has been added (new for this release):

  • exclude port-profile

Modified Commands for FastIron 10.0.20b_cd6

No commands have been modified (updated for this release).

Deprecated Commands for FastIron 10.0.20b_cd6

No commands have been deprecated for this release.

Reintroduced Commands for FastIron 10.0.20b_cd6

No commands have been reintroduced in this release.

New Commands for FastIron 10.0.20b_cd1

The following commands have been added (new for this release):

  • bootfile-url
  • chassis led off
  • controller-address (DHCPv6)
  • exclude-ports
  • ipv6 address autoconfig
  • ipv6 dhcp6-client auto-update enable
  • ipv6 sg-access-group
  • ipv6 sg-access-list
  • led mode
  • rfc-8365-compat-enable
  • sg-aclv6 enable
  • show ipv6 dhcp6-client options
  • wired direct-clients enable

Modified Commands for FastIron 10.0.20b_cd1

The following commands have been modified (updated for this release).

  • breakout ethernet
  • ip dhcp-server pool
  • permit
  • radius-server key
  • show ip bgp evpn routes
  • show ipv6 dhcp6 snooping info
  • show optic
  • show tech-support
  • static-port-ip-mapping
  • supportsave
  • username

Deprecated Commands for FastIron 10.0.20b_cd1

The following commands have been deprecated in this release.

  • aaa authentication snmp-server
  • rfc-8365-compat-disable

RUCKUS ICX 8100 Layer 3 Support

The following Layer 3 features are not supported for RUCKUS ICX 8100 devices:

  • BGP4
  • BGP4+
  • GRE
  • IP MAC addresses
  • MSDP
  • MTU
  • Multi-VRF
  • OSPFv2
  • OSPFv3
  • PBR
  • PIM
  • PIM6
  • RIPv1
  • RIPv2
  • RIPng
  • TCP MSS
  • Tunnels
  • uRPF
  • VRRPv2
  • VRRPv3
  • VRRP-E
  • VRRP-E Short Path Forwarding

License commands are not supported for ICX 8100 devices.

New Commands for FastIron 10.0.20a

The following commands have been added (new for this release):

  • add (command)
  • anycast-gw-mac
  • command-list
  • copy flash scp/tftp (.pcap)
  • ddos-guard arp
  • ddos-guard udp enable
  • dhcp6 snooping relay information
  • ethernet-segment
  • es-type
  • execution-time
  • green-mode
  • ip arp inspection
  • ip dhcp snopping
  • ipv6 dhcp6 snooping
  • mac-authentication keep-alive
  • monitor capture (interface)
  • monitor capture clear
  • monitor capture delete
  • monitor capture limit
  • monitor capture match
  • monitor capture start/stop
  • redundancy-mode
  • repeat daily
  • repeat monthy
  • repeat weekly
  • sa-limit
  • schedule
  • show green-mode led-timer
  • show ip bgp evpn es
  • show ip dhcp snooping ethernet
  • show monitor capture
  • show port-profile-config
  • show statistics ddos-guard arp drop counter
  • show statistics ddos-guard arp mac counter
  • show statistics ddos-guard udp stats
  • show statistics dos-attack udp
  • show time-profile
  • show time-profile brief
  • show time-profile profile logs
  • start-time
  • success
  • terminate-date
  • time-profile

Modified Commands for FastIron 10.0.20a

The following commands have been modified (updated for this release).

  • ip route
  • lag
  • lldp-device
  • port security
  • spanning-tree 802-1w
  • spanning-tree 802-1w ethernet
  • show 802-1w
  • show ip bgp evpn attribute-entries
  • show ip bgp evpn routes
  • show ip interface
  • show ip msdp peer
  • show ip static route
  • show l2vpn evpn
  • show watcher

Deprecated Commands for FastIron 10.0.20a

No commands have been deprecated in this release.

Reintroduced Commands for FastIron 10.0.20

The following command has been reintroduced in this release.

  • trace-l2

New Commands for FastIron 10.0.20

The following commands have been added (new for this release):

  • action
  • address-family l2vpn evpn
  • arp-suppression
  • clear pppoe intermediate-agent
  • delay-server
  • dhcp-relay information
  • dhcpv6-relay information
  • encapsulation vxlan
  • evpn-instance
  • evpn-instance range
  • host-location
  • host-reachability protocol bgp
  • inspect
  • ip evpn prefix-list
  • ip tcp analytics rate
  • ippm profile
  • jitter threshold
  • l2vpn evpn
  • mac duplication limit
  • match evpn-route-type
  • match evpn-vni
  • match ip address evpn-prefix-list
  • my-mac advertise
  • pppoe intermediate-agent
  • rd (VNI)
  • rfc-8365-compat-disable
  • route-target export
  • route-target import
  • rtt
  • schedule start
  • show access tcam group
  • show dhcpv4-relay information
  • show dhcpv6-relay information
  • show ip bgp evpn attribute-entries
  • show ip bgp evpn neighbors
  • show ip bgp evpn routes
  • show ip bgp evpn summary
  • show ippm profile
  • show l2vpn evpn
  • show pppoe intermediate-agent
  • show watcher
  • slot 2 uplink-40g
  • trace-l2
  • ttl_threshold
  • type layer2-extension evpn
  • watcher name
  • watch ippm
  • type layer2-extension evpn
  • unknown-ucast-suppress
  • vni

Modified Commands for FastIron 10.0.20

The following commands have been modified (updated for this release).

  • arp
  • auth-fail-action
  • authentication fail-action
  • banner
  • client-to-client-reflection
  • clock summer-time
  • graceful-restart (BGP)
  • ip access-group
  • ip access-group frag deny
  • ipv6 access-group
  • neighbor activate
  • neighbor route-map
  • neighbor route-reflector-client
  • neighbor send-community
  • neighbor weight
  • poe enable
  • reserved-vlan map
  • qinq-tunnel cvlan
  • show access-list tcam
  • show qinq-tunnel
  • show reserved-vlan map
  • show running-config
  • supportsave

Deprecated Commands for FastIron 10.0.20

No commands have been deprecated for this release.

Other Enhancements in FastIron release 10.0.20

Feature

Description

Location

Minor editorial updates

Minor editorial updates were made throughout the Command Reference.

All chapters.

Updates to address defects

Minor updates on commands throughout to address defects.

All chapters.

Parent topic: About This Document