addresses. Some RUCKUS devices with lesser TCAM (such as the ICX7150) are limited to 256 IPSG entries. The scaling number of 256 entries per port in the ICX7150 and 512 entries per port in the other platforms is not guaranteed and depends on the rules regarding free TCAM. The amount of free TCAM
Identifies the VE interface that must be used to reach the remote host. Privileged EXEC mode The telnet command establishes a Telnet connection from a device to a remote host using the console. To see the number of open Telnet sessions at any time, enter the show telnet command. RUCKUS ICX7150 devices
an IPv6 address or explicitly enabling IPv6 on that interface. ICX7150 and ICX 8100 devices do not support tunnels or VRFs. The no form of the command disables IPv6 static route next-hop recursion. If a VRF is configured, the no form of the command removes the static IPv6 route configuration from
configuring an IPv6 address or explicitly enabling IPv6 on that interface. ICX7150 and ICX 8100 devices do not support tunnels or VRFs. The no form of the command disables IPv6 static route next-hop resolution through the designated protocol. If a VRF is configured, the no form of the command removes the
destinations: Destination network, using an IP address and network mask or prefix length Default network route Next-hop router Next-hop tunnel gateway Next-hop network protocol type Ethernet interface, typically used for directly attached destination networks Virtual interface Null interface ICX7150 devices