Search Results: "icx 7650"

BGP4 - IPV4 Border Gateway Protocol BGP4 - IPV4 Border Gateway Protocol BGP4 - IPV4 Border Gateway Protocol Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 BGP4 No No 08.0.20 08.0.95 08.0.70 08.0.90 BGP4 Graceful Restart No No 08.0.20 08.0.95 08.0.70 08.0.90 BGP4 Graceful Restart

SSH - Secure Shell SSH - Secure Shell SSH - Secure Shell Feature ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 SCP 08.0.60 10.0.10d 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 SSH 08.0.60 10.0.10d 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 Secure Shell (SSH) version 2 08.0.60

rear module for stacking with four 40-Gbps ports. uplink-100g Configures the rear module for two 100-Gbps uplink ports. uplink-40g Configures the rear module for two 40-Gbps uplink ports. Global configuration mode The command applies to ICX 7650 devices only. Use the no form of the command to

rear module for stacking with four 40-Gbps ports. uplink-100g Configures the rear module for two 100-Gbps uplink ports. uplink-40g Configures the rear module for two 40-Gbps uplink ports. Global configuration mode The command applies to ICX 7650 devices only. Use the no form of the command to

features do not change for ICX 7650 devices enabled as CB units. Layer 3 unicast features in a Campus Fabric domain Layer 3 PE support Features and capabilities IPv4 IPv6 Static Routes Yes Yes Host Routes Yes Yes Virtual Interfaces Yes Yes Routed Interfaces Yes Yes Route-only Support Yes Yes RIP v1/v2

Command history 08.0.20 This command was introduced. 08.0.30 Support for this command was added on ICX 7450 devices. 08.0.70 Support for this command was added on ICX 7650 devices. 08.0.90 Support for this command was added on ICX 7850 devices.

this command was added on ICX 7450 devices. 08.0.70 Support for this command was added on ICX 7650 devices. 08.0.90 Support for this command was added on ICX 7850 devices.

cannot be used when port LEDs are turned on to locate a device. If the status mode is changed, the LED status will be changed to the respective mode. The LED ON/OFF feature is supported only on the platforms where LED status mode is available. The status mode is supported on the ICX 7150, ICX 7650, and

no optical-monitor non-ruckus-optic-enable Optical transceivers are not monitored. alarm-interval Specifies the interval at which alarms and warning messages are sent. The default and minimum timer for ICX 7450, ICX 7550, ICX 7650, RUCKUS ICX 7750, and ICX 7850 devices is 8 minutes. The default

rear module for stacking with four 40-Gbps ports. uplink-100g Configures the rear module for two 100-Gbps uplink ports. uplink-40g Configures the rear module for two 40-Gbps uplink ports. Global configuration mode The command applies to ICX 7650 devices only. Use the no form of the command to