Search Results: "icx 7650"

extenders (PEs), or PE units, to a set of ICX 7650, ICX 7750, or ICX 7850 stack units configured as the control bridge (CB). The CB stack must contain units of the same model family but can contain different stackable SKUs for that model family. The CB provides a single point of management for the

replication ports. For ICX 7750, ICX 7650, and ICX 7850 devices, l2mc is replaced with ipmc in the output. ref_cnt Indicates the number of IP multicast mcache entries using this mac mcache entry. Mcast group The IPv4 multicast group address. Src Addr IPv4 multicast source address. OIF Outgoing

7250 512 2048 ICX 7450 512 6000 ICX 7550 512 6000 ICX 7650 512 1024 ICX 7750 512 1024 ICX 7850 512 1024 The no form of the command resets the number of allowable entries in the static ARP table to the default value. The following example increases the maximum number of static ARP table entries you

-Gbps SPX PE links to 10-Gbps links. 1-Gbps connections between CB units and PE units are supported beginning from FastIron release 08.0.80. Valid ICX 7650 CB-to-PE port combinations CB port PE port 40-Gbps QSFP (1x40Q module) 10-Gbps Fiber (4x10F module) 10-Gbps Copper (4x10T module) 1-Gbps Fiber

31-Bit Subnet Masks on Point-to-Point Networks 31-Bit Subnet Masks on Point-to-Point Networks 31-Bit Subnet Masks on Point-to-Point Networks 31-bit subnet masks are supported on ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, ICX 7750, and ICX 7850 devices running the full Layer 3 image. To

7250, ICX 7450, ICX 7550, ICX 7650, ICX 7750, and ICX 7850 devices. IPv6 PIM convergence on MAC address movement is applicable only when the multicast source and IPv6 PIM routers are in the same Layer 2 domain.

Layer 2 loop detection protocols. Suppressing the link status notification allows a quick port status change and recovery to occur without triggering any of the changes that are necessary when a port stays down. By default, the delay time is not configured. Configuring delayed Layer 3 notifications on the VE feature is supported on ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, ICX 7750, and ICX 7850 product families from RUCKUS.

entries 5120 7168 5120 TCAM Space Allocation on ICX 7650 Devices Default Maximum Minimum IPv4 route entries 98304 131072 98304 IPv6 route entries 5120 7168 5120 TCAM Space Allocation on ICX 7450 Devices Default Maximum Minimum IPv4 route entries 12000 15168 4096 IPv6 route entries 5120 5120 68 TCAM

extenders (PEs), or PE units, to a set of ICX 7650, ICX 7750, or ICX 7850 stack units configured as the control bridge (CB). The CB stack must contain units of the same model family but can contain different stackable SKUs for that model family. The CB provides a single point of management for the

connections. The ICX 7550-4X25GF new flex module is supported only on the ICX 7550 switch models. This module is not supported on the ICX 7650 switch models. ICX 7550 Module 2 Stacking and Uplink Compatibility with Module 3 User Profiles ICX 7550 Model Module-2 Module-3 Stacking/uplink Ports Ports X Speed