connections. The ICX 7550-4X25GF new flex module is supported only on the ICX 7550 switch models. This module is not supported on the ICX7650 switch models. ICX 7550 Module 2 Stacking and Uplink Compatibility with Module 3 User Profiles ICX 7550 Model Module-2 Module-3 Stacking/uplink Ports Ports X Speed
. The RUCKUS ICX7650, ICX 7450, and ICX 7250 devices support enabling ports in either Layer 2, Layer 3, or Layer23 mode. OpenFlow Match Rules Match rule RUCKUS ICX device Port enabled for Layer 2 mode Yes Source port Yes Source or destination MAC address Yes These devices support either source MAC
Ruckus ICX7650, the following restrictions apply: Ports with OpenFlow hybrid mode enabled cannot be added to an untagged VLAN group. OpenFlow hybrid mode cannot be enabled on ports added to an untagged VLAN group. OpenFlow hybrid port mode topology shows a topology in which port 1/1 on Device-1 and
Campus Fabric Campus Fabric Campus Fabric Campus Fabric is also referred to as Switch Port Extender (SPX). Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX7650 ICX 7850 802.1BR control bridge No No No No 8.0.80 8.0.95 802.1BR port extender 8.0.70 The ICX 7150-C08P does not support Campus Fabric
PoE/PoE+ - Power over Ethernet PoE/PoE+ - Power over Ethernet PoE/PoE+ - Power over Ethernet Feature Legacy inline power is not supported in 4-pair PoE ports. ICX 7150 ICX 7150-ES ICX 7550 ICX7650 ICX 7850 ICX 8100 ICX 8200 Auto PoE firmware upgrade 08.0.70 10.0.10d 08.0.95 08.0.70 No 10.0.10f
7550, ICX7650, ICX 7850, and ICX 8200 devices. IPv6 PIM convergence on MAC address movement is applicable only when the multicast source and IPv6 PIM routers are in the same Layer 2 domain.
7250, ICX 7450, ICX 7550, ICX7650, and ICX 7850 devices. IPv6 PIM convergence on MAC address movement is applicable only when the multicast source and IPv6 PIM routers are in the same Layer 2 domain.
7250 512 2048 ICX 7450 512 6000 ICX 7550 512 6000 ICX7650 512 1024 ICX 7750 512 1024 ICX 7850 512 1024 ICX 8100 512 2048 ICX 8200 512 2048 The no form of the command resets the number of allowable entries in the static ARP table to the default value. The following example increases the maximum