Search Results: "icx 7850"

Maximum RUCKUS ICX 7150 1024 3072 512 3072 RUCKUS ICX 7250 512 8192 512 8192 RUCKUS ICX 7450 512 8192 512 8192 RUCKUS ICX 7850 6144 6144 6144 6144 For ICX 7850 and ICX 7550 devices, values are used from the forwarding profile. Refer to the forwarding-profile command in the RUCKUS FastIron Command Reference and the "Configuration Fundamentals" chapter in the RUCKUS FastIron Management Configuration Guide for more information.

ICX 7850 devices. This command is supported for ICX 7850 devices only. The following example shows information about a specified micro-BFD session. device> show bfd micro-session 1 Neighbor: 2.2.2.2 Local : 2.2.2.1 Outgoing Lag: lg9 MBfd Sessions: 1 M-Id State R-State LagPort NegRx|NegTx|DTime R ---- ----- ------- ------- ------------------- - 158 UP UP 1/1/10 300 300 900 Y Release version Command history 08.0.90 This command was introduced.

ICX 7850 devices. This command is supported for ICX 7850 devices only. The following example shows information about a specified micro-BFD session. device> show bfd micro-session 1 Neighbor: 2.2.2.2 Local : 2.2.2.1 Outgoing Lag: lg9 MBfd Sessions: 1 M-Id State R-State LagPort NegRx|NegTx|DTime R ---- ----- ------- ------- ------------------- - 158 UP UP 1/1/10 300 300 900 Y Release version Command history 08.0.90 This command was introduced.

ICX 7850 devices. This command is supported for ICX 7850 devices only. The following example shows information about a specified micro-BFD session. device> show bfd micro-session 1 Neighbor: 2.2.2.2 Local : 2.2.2.1 Outgoing Lag: lg9 MBfd Sessions: 1 M-Id State R-State LagPort NegRx|NegTx|DTime R ---- ----- ------- ------- ------------------- - 158 UP UP 1/1/10 300 300 900 Y Release version Command history 08.0.90 This command was introduced.

traffic, use the enable egress-acl-on-cpu-traffic command. CPU traffic on standby and member units in ICX 7150, ICX 7550, and ICX 7850 stacks is, by default, subjected to outbound ACL filtering. In contrast, ICX 7150, ICX 7550, and ICX 7850 standalone devices and stack active-controllers have the same default behavior as other platforms and do not apply outbound ACLs to CPU traffic.

Maximum RUCKUS ICX 7150 1024 3072 512 3072 RUCKUS ICX 7250 512 8192 512 8192 RUCKUS ICX 7450 512 8192 512 8192 RUCKUS ICX 7550 512 8192 512 8192 RUCKUS ICX 7850 8192 8192 6144 6144 For ICX 7850 and ICX 7550 devices, values are used from the forwarding profile. Refer to the forwarding-profile command

traffic, use the enable egress-acl-on-cpu-traffic command. CPU traffic on standby and member units in ICX 7150, ICX 7550, and ICX 7850 stacks is, by default, subjected to outbound ACL filtering. In contrast, ICX 7150, ICX 7550, and ICX 7850 standalone devices and stack active-controllers have the same default behavior as other platforms and do not apply outbound ACLs to CPU traffic.

key-server priority. The possible values range from 0 to 255, where 0 is highest priority and 255 is lowest priority. dot1x-mka-cfg-group mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. MACsec commands are supported only on ICX 7650 and ICX 7850 devices. The no

where encryption begins. Valid values are: 30: Encryption begins at byte 31 of the data packet. 50: Encryption begins at byte 51 of the data packet. dot1x-mka-cfg-group mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. MACsec commands are supported only on ICX 7650

packets are accepted. strict Enables validation checks for frames with MACsec headers and configures strict validation mode. If frame validation fails, counters are incremented and packets are dropped. dot1x-mka-cfg-group mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices