Search Results: "icx 8100"

VE interfaces and GRE tunnel interfaces on ICX 7850, ICX 7650, and ICX 7550 devices. On ICX 8100 and ICX 8200 devices, configuring both DSCP trust and Traffic Policy is not recommended. When DSCP trust and Traffic Policy are configured on the same interface, trust DSCP will not be honored on Layer 3

Transmission Unit (MTU): The maximum length of IP packet that a Layer 2 packet can contain. MTU cannot be configured for ICX 8100 devices. Encapsulation Type The Layer 3 device encapsulates IP packets into Layer 2 packets, to send the IP packets on the network. (A Layer 2 packet is also called a MAC layer

range. The following limitation applies to ICX 8100 and ICX 8200 devices. To support DHCP snooping for Flexible authentication clients in multiple untagged mode, DHCP snooping should also be enabled on the Flexible authentication auth-default VLAN. Example Flexible authentication configuration

domain. PVLAN Support Matrix Platform Forwarding Type Tagged Port Untagged Port ISL Port Multiple Promiscuous Port ICX 7150-ES Hardware Yes Yes Yes Yes ICX 7150 Hardware Yes Yes Yes Yes ICX 7550 Hardware Yes Yes Yes Yes ICX 7650 Hardware Yes Yes Yes Yes ICX 7850 Hardware Yes Yes Yes Yes ICX 8100 Hardware Yes Yes Yes Yes ICX 8200 Hardware Yes Yes Yes Yes

during operation. MCT is not supported on the ICX 7150, ICX 7150-ES, and ICX 8100 devices. MCT supports all the ports configured in a LAG. The maximum number of ports supported per LAG is 16 on all ICX devices that support MCT. An ICL interface cannot be configured as the CCEP in any client. BPDU guard

private VLAN domain. PVLAN Support Matrix Platform Forwarding Type Tagged Port Untagged Port ISL Port Multiple Promiscuous Port ICX 7550 Hardware Yes Yes Yes Yes ICX 7650 Hardware Yes Yes Yes Yes ICX 7850 Hardware Yes Yes Yes Yes ICX 8100 Hardware Yes Yes Yes Yes ICX 8200 Hardware Yes Yes Yes Yes

power of 2. Refer to the Usage Guidelines section for information on the range of supported values. Global configuration mode Interface configuration mode LAG configuration mode For RUCKUS ICX 8200 and ICX 8100 devices, the command is supported in global configuration mode only. The value range for

10.0.10 code stream 10.0.20b_cd1 and later Considerations Consider the following when configuring and using this feature: Hardware scaling allows for the following number of MAC ACL filter statements per device model: ICX 7150: 256 ICX 7550: 2,048 ICX 7650: 1,536 ICX 7850: 1,536 ICX 8100: 512 ICX

when configuring fanless mode. ICX 7150-ES, ICX 7150-24P, ICX 7150-48P, ICX 8100-24P, ICX 8100-48P, ICX 8200-24, ICX 8200-24P, ICX 8200-48, ICX 8200-48P, and ICX 8200-48PF devices support fanless mode. Even if fanless mode is configured on a switch, fans will be turned on temporarily during bootup or

an IP packet. The ACLs classify the traffic and the route maps that match on the ACLs set routing attributes for the traffic. PBR is not supported on ICX 8100 devices. A PBR policy specifies the routing attributes for traffic that matches the policy. Using standard ACLs with route maps in PBR, an