Search Results: "icx 8100"

SVLAN domain, that is, to all the member ports of the SVLAN might cause traffic leak between CVLANs. PVLAN is not supported on selective Q-in-Q enabled ports. Selective Q-in-Q cannot be configured on dot1x enabled ports and vice versa. For ICX 8100 and ICX 8200 devices, when the Q-in-Q tunnel is

. Valid values are from 30 through 16,000,000. lockup time Configures the lockup period in seconds. Valid values are from 1 through 10,000 seconds. Global configuration mode Interface configuration sub-mode VLAN configuration sub-mode This command is not supported for ICX 8100 and ICX 8200 devices. In a

power of 2. Refer to the Usage Guidelines section for information on the range of supported values. Global configuration mode Interface configuration mode LAG configuration mode For RUCKUS ICX 8200 and ICX 8100 devices, the command is supported in global configuration mode only. The value range for

. Valid values are from 30 through 16,000,000. lockup time Configures the lockup period in seconds. Valid values are from 1 through 10,000 seconds. Global configuration mode Interface configuration sub-mode VLAN configuration sub-mode This command is not supported for ICX 8100 and ICX 8200 devices. In a

ID or with the peer RBridge ID. The Client RBridge ID is unique and must be the same on cluster devices. RUCKUS recommends keeping only ICL ports in the session VLAN during operation. MCT is not supported on the ICX 8100 devices. MCT supports all the ports configured in a LAG. The maximum number of

Transmission Unit (MTU): The maximum length of IP packet that a Layer 2 packet can contain. MTU cannot be configured for ICX 8100 devices. Encapsulation Type The Layer 3 device encapsulates IP packets into Layer 2 packets, to send the IP packets on the network. (A Layer 2 packet is also called a MAC layer

Traps for stacking Traps for stacking Traps for stacking The following table has traps for stacking. RUCKUS ICX 8100 devices do not support stacking. Trap name and number Varbinds Severity Description and trap message snTrapStackingMasterElected 1.3.6.1.4.1.1991.0.163 snChasUnitIndex

Traps for stacking Traps for stacking Traps for stacking The following table has traps for stacking. RUCKUS ICX 8100 and ICX-7150-ES devices do not support stacking. Trap name and number Varbinds Severity Description and trap message snTrapStackingMasterElected 1.3.6.1.4.1.1991.0.163

image cannot be updated from uboot prompt. To stop at the uboot prompt from the console, continuously press b during the boot process. This recovery procedure is for all ICX devices. For ICX 8100 and ICX 8200 devices, when this standard recovery process does not work, refer to Golden Image . Recovery