Search Results: "icx 7650"

Provides a name for an MKA configuration group that can be applied to ports. dot1x-mka configuration mode dot1x-mka-interface configuration mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. The no form of this command deletes the MKA configuration group. MACSec is

7650, ICX 7750, and ICX 7850 devices, l2mc is replaced with ipmc in the output. For ICX 7550, ICX 7650, and ICX 7850 devices, l2mc is replaced with ipmc in the output. ref-cnt The number of mcaches using this IPMC. AgeMask Stacking unit ID where traffic flow is active (traffic ingression). HwFailMask

SPX ports, frames are dropped based on their priorities. QoS features under Campus Fabric The same QoS features available for ICX 7650 devices in a normal configuration are supported on ICX 7650 devices enabled as CB units in a Campus Fabric domain. Most QoS features available in a standard

Provides a name for an MKA configuration group that can be applied to ports. dot1x-mka configuration mode dot1x-mka-interface configuration mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. The no form of this command deletes the MKA configuration group. MACSec is

configure a Campus Fabric domain, the following steps must be completed. Configure and connect two to four ICX 7650, ICX 7750, or ICX 7850 devices in a traditional stack, or configure a standalone ICX 7650, ICX 7750, or ICX 7850. Configuring two or more devices in a stack provides redundancy for the

non-hybrid ports on the RUCKUS ICX 7750, ICX 7650, ICX 7450 and ICX 7250. Generic flows with Normal action are supported . Meter action is supported for Normal action flows. Normal action is supported for both OpenFlow v1.0.0 and OpenFlow v1.3.0. Normal action supports both tagged and untagged

ICX 7550 4000 64000 ICX 7650 8192 64000 ICX 7750 8192 64000 ICX 7850 8192 64000 ICX 8100 2048 8192 ICX 8200 2048 8192 The no form of the command resets the number of allowable static ARP table entries to the default value. The following example increases the maximum number of ARP table entries you

that can be configured depends on the platform. Platform Minimum Default Maximum ICX 7250 N/A N/A N/A ICX 7450 N/A N/A N/A ICX 7650 5120 5120 7168 ICX 7750 5120 5120 7168 The no form of the command resets the number of IPv6 routes to the default value. The following example configures the number of IPv4 routes as 5000. device# configure terminal device(config)# system-max ip6-route 5000 device(config)# write memory

for router images only. This command is supported for RUCKUS ICX 7550, ICX 7650, and ICX 7850 devices only. The no form of the command disables the range of mapped VLANs over a VXLAN overlay gateway. The following example extends a range of mapped VLANs (VLAN 200 through VLAN 300) over a VXLAN

, RUCKUS ICX 7650, and RUCKUS ICX 7850 devices, ACL logging is not supported for ACLs applied to outbound traffic. In a rule that includes one or more of the following parameters, the log keyword is ignored: dscp-matching dscp-marking 802.1p-priority-matching 802.1p-priority-marking 802.1p-and