-
deny (Extended IPv4 ACLs and IPv6 ACLs)
Last Updated
Sep 03, 2026
for ICMP protocol and ICMP message type: dscp-marking dscp-matching On RUCKUS ICX 7150 and RUCKUS ICX 7750 devices, ACL logging is not supported for egress ACLs. On RUCKUS ICX 7150 devices, ACL logging is not supported for egress ACLs. When specifying type of service (ToS), you can indicate
-
deny (Extended IPv4 ACLs and IPv6 ACLs)
Last Updated
Sep 03, 2026
for ICMP protocol and ICMP message type: dscp-marking dscp-matching On RUCKUS ICX 7150 and RUCKUS ICX 7750 devices, ACL logging is not supported for egress ACLs. When specifying type of service (ToS), you can indicate multiple tos-value options by entering the sum of the needed ToS options. For
-
Displaying PoE Operational Status
Last Updated
Sep 03, 2026
the show inline power pd command. To display the inline power debug information, use the show inline power debug-info command. The following example displays show inline power command output for an ICX 7750 device. IEEE 802.3bt is backward compatible with 802.3af and 802.3at. The show inline power
-
Commands Si - Z
Last Updated
Sep 03, 2026
. spx allow-pe-movement Allows you to move PE units to other CB SPX ports without changing the PE ID or changing any related port configuration. spx cb-configure Enters 802.1br control bridge (CB) configuration mode, where SPX ports and LAGs are configured. spx cb-enable Enables a standalone ICX 7750 or
-
Commands Si - Z
Last Updated
Sep 03, 2026
port configuration. spx cb-configure Enters 802.1br control bridge (CB) configuration mode, where SPX ports and LAGs are configured. spx cb-enable Enables a standalone ICX 7750 or ICX 7650 or an ICX 7750 or ICX 7650 stack as an SPX control bridge (CB). spx interactive-setup Allows you to configure
-
RUCKUS FastIron Stacking Configuration Guide, 08.0.95
Last Updated
Sep 03, 2026
connected; otherwise, the stack interactive-setup utility treats the stack as an invalid topology. For example, one valid-stack-port set for ICX 7750 devices is (x/2/1, x/2/4, 3). You must connect either x/2/1 or x/2/4. The valid-stack-port requirement does not apply to the process of discovering new
-
sequence (permit | deny in IPv6 ACLs)
Last Updated
Sep 03, 2026
sequence values determines the order of rule processing. If you do not specify a sequence value, the rule is added to the end of the list. Such a rule is automatically assigned the next multiple of 10 as a sequence number. On RUCKUS ICX 7150 and ICX 7750 devices, ACL logging is not supported for
-
sequence (permit | deny in IPv6 ACLs)
Last Updated
Sep 03, 2026
sequence values determines the order of rule processing. If you do not specify a sequence value, the rule is added to the end of the list. Such a rule is automatically assigned the next multiple of 10 as a sequence number. On RUCKUS ICX 7150 and ICX 7750 devices, ACL logging is not supported for
-
sequence (permit | deny in IPv6 ACLs)
Last Updated
Sep 03, 2026
sequence values determines the order of rule processing. If you do not specify a sequence value, the rule is added to the end of the list. Such a rule is automatically assigned the next multiple of 10 as a sequence number. On RUCKUS ICX 7150 and ICX 7750 devices, ACL logging is not supported for
-
sequence (permit | deny in IPv6 ACLs)
Last Updated
Sep 03, 2026
sequence values determines the order of rule processing. If you do not specify a sequence value, the rule is added to the end of the list. Such a rule is automatically assigned the next multiple of 10 as a sequence number. On RUCKUS ICX 7150 and ICX 7750 devices, ACL logging is not supported for