Search Results: "icx 7750"

-marking dscp-matching For RUCKUS ICX 7150 and ICX 7750 devices, ACL logging is not supported for egress ACLs. For RUCKUS ICX 7150 devices, ACL logging is not supported for egress ACLs. When specifying type of service (ToS), you can indicate multiple tos-value options by entering the sum of the needed

This command is supported for Ruckus ICX 7750 and ICX 7850 devices. This command is supported for ICX 7850 devices only. The show bfd neighbors command displays the following information: Output Field Description NeighborAddress The IPv4 or IPv6 address of the remote peer. State The current state of

-marking dscp-matching On the RUCKUS ICX 7150 and and ICX 7750, ACL logging is not supported for egress ACLs. When specifying type of service (ToS), you can indicate multiple tos-value options by entering the sum of the needed ToS options. For example, to specify both max-reliability and min-delay

This command is supported for Ruckus ICX 7750 and ICX 7850 devices. The show bfd neighbors command displays the following information: Output Field Description NeighborAddress The IPv4 or IPv6 address of the remote peer. State The current state of the BFD session: A.DOWN - The administrative down state

802.1br control bridge (CB) configuration mode, where SPX ports and LAGs are configured. spx cb-enable Enables a standalone ICX 7750 or ICX 7650 or an ICX 7750 or ICX 7650 stack as an SPX control bridge (CB). spx interactive-setup Allows you to configure several options interactively: change existing

output displayed when the PE joins a CB. CB Configuration The following example shows a CB and PE unit configuration. The first segment shows the running configuration, including a stack of two ICX 7750 units. ICX7750-26Q Router> en ! ICX7750-26Q Router# show running-config Current configuration

-enable Enables a standalone ICX 7750 or ICX 7650 or an ICX 7750 or ICX 7650 stack as an SPX control bridge (CB). spx interactive-setup Allows you to configure several options interactively: change existing PE IDs, discover and assign IDs to new PE units, and convert existing or new standalone devices to

for ICMP protocol and ICMP message type: dscp-marking dscp-matching On RUCKUS ICX 7150 devices, ACL logging is not supported for egress ACLs. On RUCKUS ICX 7150 and RUCKUS ICX 7750 devices, ACL logging is not supported for egress ACLs. When specifying type of service (ToS), you can indicate multiple

for ICMP protocol and ICMP message type: dscp-marking dscp-matching On RUCKUS ICX 7150 and RUCKUS ICX 7750 devices, ACL logging is not supported for egress ACLs. When specifying type of service (ToS), you can indicate multiple tos-value options by entering the sum of the needed ToS options. For

available in match statements for ICMP protocol and ICMP message type: dscp-marking dscp-matching For RUCKUS ICX 7150 and ICX 7750 devices, ACL logging is not supported for egress ACLs. When specifying type of service (ToS), you can indicate multiple tos-value options by entering the sum of the