Search Results: "icx 7850"

IPv4 Multicast VLAN Traffic Reduction IPv4 Multicast VLAN Traffic Reduction IPv4 Multicast VLAN Traffic Reduction Feature ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 IGMP (v1, v2, and v3) 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 IGMP v1/v2/v3 snooping (global and VLAN level) 08.0.95 08.0.70

IPv6 host address. device# configure terminal device(config)# snmp-server host ipv6 2001:DB8:89::13 mypublic port 200 device(config)# write memory device(config)# management source-interface ethernet 1/2/1 protocol snmp device(config)# snmp-server enable traps holddown-time 40 The following RUCKUS ICX devices support IPv6 for SNMPv3: ICX 7550, ICX 7650, and ICX 7850.

Enabling Priority Flow Control for a Single Priority Group Enabling Priority Flow Control for a Single Priority Group Enabling Priority Flow Control for a Single Priority Group Follow these steps to enable PFC for a single priority group (PG). PFC is supported only on RUCKUS ICX 7550 and ICX 7850 devices

; the default is 1024. Global configuration mode For ICX 7850 and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied. Refer to the forwarding-profile command for more

. Enabling the flooding of unregistered IPv4 multicast frames in an IGMP-snooping-enabled VLAN is supported on the following platforms: RUCKUS ICX 8100 (standalone) RUCKUS ICX 8200 (standalone and stacking) RUCKUS ICX 7850 (MCT, standalone, and stacking) RUCKUS ICX 7650 (MCT, standalone, and stacking

OSPFv3 - IPv6 Open Shortest Path First OSPFv3 - IPv6 Open Shortest Path First OSPFv3 - IPv6 Open Shortest Path First Feature ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 OSPFv3 08.0.95 08.0.70 08.0.90 No 10.0.00 Route redistribution into OSPFv3 08.0.95 08.0.70 08.0.90 No 10.0.00 OSPFv3 route

; the default is 1024. Global configuration mode For ICX 7850 and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied. Refer to the forwarding-profile command for more

For ICX 7850 and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied. Refer to the forwarding-profile command for more information. The no form of this command restores

; the default is 1024. Global configuration mode For ICX 7850 and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied. Refer to the forwarding-profile command for more

For ICX 7850 and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied. Refer to the forwarding-profile command for more information. The no form of this command restores