Search Results: "icx 8200"

. Valid values are from 30 through 16,000,000. lockup time Configures the lockup period in seconds. Valid values are from 1 through 10,000 seconds. Global configuration mode Interface configuration sub-mode VLAN configuration sub-mode This command is not supported for ICX 8100 and ICX 8200 devices. In a

power of 2. Refer to the Usage Guidelines section for information on the range of supported values. Global configuration mode Interface configuration mode LAG configuration mode For RUCKUS ICX 8200 and ICX 8100 devices, the command is supported in global configuration mode only. The value range for

. Valid values are from 30 through 16,000,000. lockup time Configures the lockup period in seconds. Valid values are from 1 through 10,000 seconds. Global configuration mode Interface configuration sub-mode VLAN configuration sub-mode This command is not supported for ICX 8100 and ICX 8200 devices. In a

range. The following limitation applies to ICX 8100 and ICX 8200 devices. To support DHCP snooping for Flexible authentication clients in multiple untagged mode, DHCP snooping should also be enabled on the Flexible authentication auth-default VLAN. Example Flexible authentication configuration

configuring PPPoE IA on RUCKUS ICX 8200 devices. Point-to-Point Protocol over Ethernet Intermediate Agent (PPPoE IA) Selective Q-in-Q New objects have been added to configure Selective Q-in-Q. Selective Q-in-Q DAI Interface Configuration The table has been updated to include a new OID. DAI Interface

image cannot be updated from uboot prompt. To stop at the uboot prompt from the console, continuously press b during the boot process. This recovery procedure is for all ICX devices. For ICX 8100 and ICX 8200 devices, when this standard recovery process does not work, refer to Golden Image . Recovery

VE interfaces and GRE tunnel interfaces on ICX 7850, ICX 7650, and ICX 7550 devices. On ICX 8100 and ICX 8200 devices, configuring both DSCP trust and Traffic Policy is not recommended. When DSCP trust and Traffic Policy are configured on the same interface, trust DSCP will not be honored on Layer 3

for ICX 7150 devices. The default alarm interval for ICX 7150 is 3 minutes. device(config)# optical-monitor Enabled optical monitoring and set alarm/warn interval to default(3 minutes) The default alarm interval for ICX 7550, ICX 7650, ICX 7850, and RUCKUS ICX 8200 devices is 8 minutes. device

domain. PVLAN Support Matrix Platform Forwarding Type Tagged Port Untagged Port ISL Port Multiple Promiscuous Port ICX 7150-ES Hardware Yes Yes Yes Yes ICX 7150 Hardware Yes Yes Yes Yes ICX 7550 Hardware Yes Yes Yes Yes ICX 7650 Hardware Yes Yes Yes Yes ICX 7850 Hardware Yes Yes Yes Yes ICX 8100 Hardware Yes Yes Yes Yes ICX 8200 Hardware Yes Yes Yes Yes

private VLAN domain. PVLAN Support Matrix Platform Forwarding Type Tagged Port Untagged Port ISL Port Multiple Promiscuous Port ICX 7550 Hardware Yes Yes Yes Yes ICX 7650 Hardware Yes Yes Yes Yes ICX 7850 Hardware Yes Yes Yes Yes ICX 8100 Hardware Yes Yes Yes Yes ICX 8200 Hardware Yes Yes Yes Yes