-
Port-based fixed rate limiting configuration notes
Last Updated
Sep 03, 2026
types of LAG. You can configure rate limiting on individual ports of the LAG. You cannot configure rate limiting on the LAG itself. The RUCKUS ICX 7650 applies rating limiting starting with the Layer 1 overhead. All other ICX devices begin counting the packet size from the Layer 2 header onwards.
-
Campus Fabric terminology
Last Updated
Sep 03, 2026
local ports. The control bridge can consist of a standalone ICX 7650 or a traditional stack of ICX 7650 stacking units. clean unit A clean unit is a device running switch/router mode that has no startup_config flash during bootup and currently has no startup_config. (That is, the write memory command
-
show macsec statistics ethernet
Last Updated
Sep 03, 2026
information is to be displayed. The interface is designated by device number in stack/slot on the device/interface on the slot. brief Specifies brief output for all MACsec interfaces. User EXEC mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. MACsec commands are
-
Configuring Stacking Ports or Trunks in a Live System
Last Updated
Sep 03, 2026
apply to ICX 7650 devices. ICX 7650 stacking ports cannot be used as data ports when they boot up in default stacking mode. As a result, there is no need to enable ICX 7650 stacking ports and no applicable CLI. The following example converts a live stacking link to a data link and then recreates a
-
Configuring Stacking Ports or Trunks in a Live System
Last Updated
Sep 03, 2026
apply to ICX 7650 devices. ICX 7650 stacking ports cannot be used as data ports when they boot up in default stacking mode. As a result, there is no need to enable ICX 7650 stacking ports and no applicable CLI. The following example converts a live stacking link to a data link and then recreates a
-
Configuring Stacking Ports or Trunks in a Live System
Last Updated
Sep 03, 2026
apply to ICX 7650 devices. ICX 7650 stacking ports cannot be used as data ports when they boot up in default stacking mode. As a result, there is no need to enable ICX 7650 stacking ports and no applicable CLI. The following example converts a live stacking link to a data link and then recreates a
-
show macsec statistics ethernet
Last Updated
Sep 03, 2026
information is to be displayed. The interface is designated by device number in stack/slot on the device/interface on the slot. brief Specifies brief output for all MACsec interfaces. User EXEC mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. MACsec commands are
-
Configuration Notes and Feature Limitations for IPv6 Source Guard
Last Updated
Sep 03, 2026
2048 RUCKUS ICX 7650 2048 RUCKUS ICX 7850 1536 The recommended maximum number of IPSGv6 entries on a stack of RUCKUS ICX 7250, ICX 7450, ICX 7550, ICX 7650, or ICX 7850 devices is 8192. You can enable IPSGv6 on a range of ports within a given slot only, for example, ports 1/1/1 thru 1/1/24. Enabling
-
Configuration Notes and Feature Limitations for IPv6 Source Guard
Last Updated
Sep 03, 2026
outlined in the following table: Recommended Number of Entries for RUCKUS ICX Devices Devices Recommended Maximum Number of IPSGv6 Entries Per Device RUCKUS ICX 7150 90 RUCKUS ICX 7550 2048 RUCKUS ICX 7650 2048 RUCKUS ICX 7850 1536 RUCKUS ICX 8100 512 RUCKUS ICX 8200 512 The recommended maximum number of
-
RUCKUS SmartZone and Cloudpath (LT-GD) Network Segmentation Configuration Guide, 6.1.2
Last Updated
Sep 03, 2026
segmentation: One or more of the following switches as the distribution switch: RUCKUS ICX 7550, RUCKUS ICX 7650, or RUCKUS ICX 7850. (VxLAN is supported only on these models.) One or more of the following switches as access switches (also called "edge switches"). Switches: RUCKUS ICX 7150, RUCKUS ICX