Search Results: "icx 7450"

Upgrade Considerations for the Layer 3 Premium License Upgrade Considerations for the Layer 3 Premium License Upgrade Considerations for the Layer 3 Premium License In FastIron 08.0.70 and earlier releases, Layer 3 Premium licenses on the ICX 7250 and ICX 7450 were implemented as XML licenses

Upgrade Considerations for the Layer 3 Premium License Upgrade Considerations for the Layer 3 Premium License Upgrade Considerations for the Layer 3 Premium License In FastIron 08.0.70 and earlier releases, Layer 3 Premium licenses on the ICX 7250 and ICX 7450 were implemented as XML licenses

Provides a name for an MKA configuration group that can be applied to ports. dot1x-mka configuration mode dot1x-mka-interface configuration mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. The no form of this command deletes the MKA configuration group. MACSec is

ethernet 1/2/2), or you can combine a range with a list (for example, ethernet 1/1/1 to ethernet 1/1/4 ethernet 1/1/1 ethernet 1/1/2). Global configuration mode The port ID subtype to advertise is only configurable on ICX 7750, ICX 7450, and ICX 7250 devices. The port ID subtype to advertise is only

default VRF of the interface is considered. The next hop in a route map will take effect only if the interface on which the route map is applied and the next hop in the route map are in the same VRF The no-ttl-decrement option is supported only on ICX 7750 and ICX 7450 devices. The no-ttl-decrement

error because spx pe-enable is not configured in the startup file. A device cannot be enabled as a PE if stacking is enabled on the unit. The command is available only on an ICX 7450 router. A standalone unit switches between regular and Provisional-PE mode immediately when spx pe-enable is

ICX 7650 stack or standalone device as a CB. Connect ICX 7450, ICX 7250, or ICX 7150 devices to the CB. If you elect to do manual configuration, a fourth step is needed: Enable and configure the ICX 7450, ICX 7250, or ICX 7150 devices as PE units. No matter which configuration method you use, when a

Provides a name for an MKA configuration group that can be applied to ports. dot1x-mka configuration mode dot1x-mka-interface configuration mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. The no form of this command deletes the MKA configuration group. MACSec is

error because spx pe-enable is not configured in the startup file. A device cannot be enabled as a PE if stacking is enabled on the unit. The command is available only on an ICX 7450 router. A standalone unit switches between regular and Provisional-PE mode immediately when spx pe-enable is

control bridge (CB). Enable and configure the stack or standalone device as a CB. Connect ICX 7450, ICX 7250, or ICX 7150 devices to the CB. If you elect to do manual configuration, a fourth step is needed: Enable and configure the ICX 7450, ICX 7250, or ICX 7150 devices as PE units. No matter which