Search Results: "icx 8100"

show license installed show license installed show license installed Displays detailed information about Self Authenticated Upgrade licenses installed on a device. show license installed Privileged EXEC mode ICX 8100 devices do not support license commands.The command can be used on a standalone

stack. Privileged EXEC level. The command can be used to display SAU software licensing information for a specified unit on a device. ICX 8100 devices do not support license commands. The show license unit command displays the following information: Output field Description Unit Unit number assigned in

physical, loopback, or VE interface, through which the other end of the tunnel is reachable. The source interface must have at least one IP address configured on it. ICX 8100 devices do not support tunnels. The following example configures the IP address 10.1.2.4 as the source address for a specific

For ICX 8200, ICX 8100, ICX 7850, and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied. Refer to the forwarding-profile command for more information. The configured

snooping mcache entries is supported. num Specifies the maximum number of MLD snooping mcache entries supported. For ICX 7650 devices, valid values range from 256 through 8000. Global configuration mode For ICX 8200, ICX 8100, ICX 7850, and ICX 7550 devices, values are used from the forwarding profile

number of IGMP snooping cache entries is supported. num Specifies the maximum number of IGMP snooping mcache entries supported. The value ranges from 256 through 8192. The default maximum number of IGMP snooping mcache entries is 512. Global configuration mode For ICX 8200, ICX 8100, ICX 7850, and ICX

switch using the ipv6 unicast-routing command and must enable IPv6 on at least one interface by configuring an IPv6 address or explicitly enabling IPv6 on that interface. ICX 7150 and ICX 8100 devices do not support tunnels or VRFs. The no form of the command disables IPv6 static route next-hop

IP Cache and Routing Table Scaling IP Cache and Routing Table Scaling IP Cache and Routing Table Scaling ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 Routing Table – IPv4 (Shared by all VRFs) 1,000 1,000 Profile 1: 97,280 Profile 2: 8,192 Profile 3: 21,504 131,072 Profile 1

hybrid protocols and definitions: SSH Transport Layer Protocol SSH Authentication Protocol SSH Connection Protocol SecSH Public Key File Format SSH Fingerprint Format SSH Protocol Assigned Numbers SSH Transport Layer Encryption Modes SCP/SSH URI Format The allowable inbound and outbound sessions for the ICX 8100 devices have been limited for each of the following: Inbound Telnet: 5 Outbound Telnet: 5 Inbound SSH: 5 Outbound SSH: 5

PoE/PoE+ - Power over Ethernet PoE/PoE+ - Power over Ethernet PoE/PoE+ - Power over Ethernet Feature Legacy inline power is not supported in 4-pair PoE ports. ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 Auto PoE firmware upgrade 08.0.95 08.0.70 No 10.0.10f 10.0.00 PoE enabled by default 08.0.95