Search Results: "icx 8200"

Software Version Supported ICX 7550, ICX 7650, ICX 7850, ICX 8100, ICX 8200 FastIron 10.0.20 and subsequent release versions in the 10.0.2x code stream ICX 7150, ICX 7550, ICX 7650, ICX 7850, ICX 8100,ICX 8200 FastIron 10.0.10 and subsequent release versions in the 10.0.1x code stream ICX 7150, ICX

For ICX 8200, ICX 8100, ICX 7850, and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied. Refer to the forwarding-profile command for more information. The configured

snooping mcache entries is supported. num Specifies the maximum number of MLD snooping mcache entries supported. For ICX 7650 devices, valid values range from 256 through 8000. Global configuration mode For ICX 8200, ICX 8100, ICX 7850, and ICX 7550 devices, values are used from the forwarding profile

number of IGMP snooping cache entries is supported. num Specifies the maximum number of IGMP snooping mcache entries supported. The value ranges from 256 through 8192. The default maximum number of IGMP snooping mcache entries is 512. Global configuration mode For ICX 8200, ICX 8100, ICX 7850, and ICX

Configuring UDP Rate Limit Configuring UDP Rate Limit Configuring UDP Rate Limit On ICX 8200 switches, the following commands can be entered in global configuration mode to enable rate limiting for all UDP packets destined to the CPU. Enter the configure terminal command to enter global

IP Cache and Routing Table Scaling IP Cache and Routing Table Scaling IP Cache and Routing Table Scaling ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 Routing Table – IPv4 (Shared by all VRFs) 1,000 1,000 Profile 1: 97,280 Profile 2: 8,192 Profile 3: 21,504 131,072 Profile 1

between the host and the broadband remote access server by intercepting all PPPoE Active Discovery (PAD) messages on a per-port basis. This feature is supported on RUCKUS ICX 8200 devices only. The PPPoE IA intercepts each PAD message coming from a PPPoE client or a PPPoE server, checking for a

The network is down. AIR Always off Not used Switch LED Behavior For detailed information on Switch LED behavior, refer to the relevant hardware installation guide: https://docs.commscope.com/bundle?labelkey=icxswitches. ICX 7150 ICX 7550 ICX 7650 ICX 7850 ICX 8200

PoE/PoE+ - Power over Ethernet PoE/PoE+ - Power over Ethernet PoE/PoE+ - Power over Ethernet Feature Legacy inline power is not supported in 4-pair PoE ports. ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 Auto PoE firmware upgrade 08.0.95 08.0.70 No 10.0.10f 10.0.00 PoE enabled by default 08.0.95

Syslog Syslog Syslog Feature ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 Syslog messages (RFC 3164) 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 Enhanced Syslog headers specific to RFC 5424 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 Real-time display of Syslog messages 08.0.95 08.0.70 08.0.90 10.0.10f