Search Results: "icx 7650"

configure a Campus Fabric domain, the following steps must be completed. Configure and connect two to four ICX 7650 devices in a traditional stack, or configure a standalone ICX 7650. Configuring two or more devices in a stack provides redundancy for the control bridge (CB). Enable and configure the

User Accounts and Passwords User Accounts and Passwords User Accounts and Passwords Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 Local user accounts 08.0.60 08.0.30 08.0.20 08.0.95 08.0.70 08.0.90 Local user passwords 08.0.60 08.0.30 08.0.20 08.0.95 08.0.70 08.0.90 Automatic re

PIM6 - IPv6 Protocol-Independent Multicast PIM6 - IPv6 Protocol-Independent Multicast PIM6 - IPv6 Protocol-Independent Multicast Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 IPv6 PIM-SSM 08.0.61 08.0.40 08.0.20 08.0.95 08.0.70 08.0.90 IPv6 PIM Sparse 08.0.61 08.0.40 08.0.20 08.0.95

VXLAN - Virtual Extensible LAN VXLAN - Virtual Extensible LAN VXLAN - Virtual Extensible LAN Feature ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 VXLAN support No No 09.0.10a 08.0.95 08.0.95 No No MACsec over VXLAN No No 09.0.10a No 09.0.10a No No VXLAN with Routing in and out

Software Upgrade Software Upgrade Software Upgrade Feature ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 System backup to USB 08.0.70 10.0.10d 08.0.95 No 08.0.90 No 10.0.00 Boot from USB 08.0.70 10.0.10d 08.0.95 08.0.70 08.0.90 No 10.0.00 Software upgrade via CLI 08.0.60

Default Route Lookup Control Non-Tunneled Tunneled IPv4 IPv6 IPv4 IPv6 ICX 7850, ICX 7650, ICX 7550 Strict mode (Interface configuration) Yes Yes Yes Yes No No Loose mode (Interface configuration) NA Yes Yes Yes No No In strict mode (interface configuration), if the number of ECMP paths for a route is more than eight, the hardware will apply loose mode check for the SIP check, even if the interface is configured as strict mode.

Default Route Lookup Control Non-Tunneled Tunneled IPv4 IPv6 IPv4 IPv6 ICX 7850, ICX 7650, ICX 7550, ICX 7450, ICX 7250 Strict mode (Interface configuration) Yes Yes Yes Yes No No Loose mode (Interface configuration) NA Yes Yes Yes No No In strict mode (interface configuration), if the number of

Gbps 4 MB RUCKUS ICX 7450 200 Gbps 4 MB RUCKUS ICX 7550 348 Gbps (24/24P) 480 Gbps (48/48P/24ZP) 560 Gbps (24F/48F/48ZP) 8 MB RUCKUS ICX 7650 480 Gbps 564 Gbps (IO 48ZP/48ZF) 328 Gbps (IO 48P) 8 MB RUCKUS ICX 7850 2.0 Tbps 3.2 Tbps 32 MB ICX 7850 devices support cut-through mode although they run in

no optical-monitor non-ruckus-optic-enable Optical transceivers are not monitored. alarm-interval Specifies the interval at which alarms and warning messages are sent. The default and minimum timer for ICX 7450, ICX 7550, ICX 7650, RUCKUS ICX 7750, and ICX 7850 devices is 8 minutes. The default

Port When None of the Clients Has Dynamic ACL Maximum Number of MAC Sessions per Port When at Least One Client Has Dynamic ACL ICX 8200 1024 32 ICX 8100 1024 32 ICX 7850 1024 32 ICX 7650 1024 32 ICX 7550 1024 32 ICX 7150 1024 32 ICX 7150-ES Models 256 2 The system limit for authenticated MAC