Search Results: "icx 7650"

ports. Support NBaseT. On ICX 7150-48ZP, default speed is auto on MultiGig ports and they advertise 100/1000/2500Mbps speeds by default. Support 802.3bz and NBase-T On ICX 7650-48ZP, default speed is auto on MultiGig ports and they advertize 100Mbps/1G/2.5G/5G/10G speeds by default. Support 802.3bz

ports. Support NBaseT. On ICX 7150-48ZP, default speed is auto on MultiGig ports and they advertise 100/1000/2500Mbps speeds by default. Support 802.3bz and NBase-T On ICX 7650-48ZP, default speed is auto on MultiGig ports and they advertize 100Mbps/1G/2.5G/5G/10G speeds by default. Support 802.3bz

configuration mode The default VLAN cannot be mapped to a VNI. The maximum number of VLANs in a range is 256. This command is supported for router images only. This command is supported for RUCKUS ICX 7550, ICX 7650, and ICX 7850 devices only. For RUCKUS ICX 7650 and ICX 7850 devices, no more than

configuration mode The default VLAN cannot be mapped to a VNI. The maximum number of VLANs in a range is 256. This command is supported for router images only. This command is supported for RUCKUS ICX 7550, ICX 7650, and ICX 7850 devices only. For RUCKUS ICX 7650 and ICX 7850 devices, no more than

of load-sharing paths supported by the Layer 3 device. You can change the maximum number of paths the Layer 3 device supports to a value from 2 through 8. On RUCKUS ICX 7650 and ICX 7850 devices, the value range for the maximum number of load-sharing paths is from 2 through 32. Maximum Number of

8100 and ICX 8200 devices. ICX 7850, ICX 7650, ICX 7550 Considerations Per-interface level configuration is available on VE interfaces and physical ports only. IPv4 and IPv6 unicast routed packets are subjected to uRPF check on ICX 7850 and ICX 7650 devices. Scaling numbers are reduced by half for

of load-sharing paths supported by the Layer 3 device. You can change the maximum number of paths the Layer 3 device supports to a value from 2 through 8. On RUCKUS ICX 7650 and ICX 7850 devices, the value range for the maximum number of load-sharing paths is from 2 through 32. Maximum Number of

packets, or OpenFlow is configured. Counters or logging information is unavailable for uRPF hits. After enabling reverse path check, you must reload the device for uRPF to be programmed. Tunnel over user VRF should not be configured on a device on which uRPF is enabled. ICX 7850, ICX 7650, ICX 7550

7150, ICX 8100, and ICX 8200 devices. ICX 7850, ICX 7650, ICX 7550 Considerations Per-interface level configuration is available on VE interfaces and physical ports only. IPv4 and IPv6 unicast routed packets are subjected to uRPF check on ICX 7850 and ICX 7650 devices. Scaling numbers are reduced by

Port When None of the Clients Has Dynamic ACL Maximum Number of MAC Sessions per Port When at Least One Client Has Dynamic ACL ICX 7850 1024 32 ICX 7650 1024 32 ICX 7550 1024 32 ICX 7450 1024 32 ICX 7250 1024 32 ICX 7150 1024 32 The system limit for authenticated MAC sessions also varies and depends