⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

Search Results: "icx 7450"

Showing 481 - 490 of 1,228 results

Relevance: best match to your search term first.

  • show ipv6 multicast optimization

    Last Updated Sep 03, 2026

    EXEC mode VLAN configuration mode This command is supported only on ICX 7250, ICX 7750, and ICX 7450 devices. This command displays the availability of L2MC group indexes in the hardware and how it is used and shared. The L2MC group index range varies depending on the platform. Values out of range are

  • non-tpm-switch-cert-validate

    Last Updated Sep 03, 2026

    -switch-cert-validate Enables the certificate validation. Global configuration mode On some ICX 7250, ICX 7450, or ICX 7750 devices, self-signed certificates are used. SmartZone honors these certificates when the non-tpm-switch-cert-validate command is entered on the SmartZone console. This command is

  • tunnel mode ipsec

    Last Updated Sep 03, 2026

    packets transmitted over the tunnel. ipv6 Specifies the application of IPsec protection for IPv6 packets transmitted over the tunnel. Tunnel interface configuration mode IPsec is supported only on ICX 7450 devices. ICX 7150 devices do not support tunnels. The no form of the command removes the IPsec

  • system-max mac

    Last Updated Sep 03, 2026

    the default. The following example changes the value for the capacity of the MAC address table to 20000. device# configure terminal device(config)# system-max mac 20000 Release Command History 08.0.40 The command is not valid as you cannot change the number in ICX 7750, ICX 7450, and ICX 7250 devices.

  • ip multicast optimization

    Last Updated Sep 03, 2026

    on ICX 7750 devices, and enabled by default on ICX 7450 and ICX 7250 devices. oif-list Shares the Output Interface Lists across entries. all Specifies all types of Output Interface Lists. Global configuration mode The no form of the command disables hardware entry optimization for Layer 2 IPv4

  • ipv6 multicast optimization

    Last Updated Sep 03, 2026

    is disabled by default on ICX 7750 devices, and enabled by default on ICX 7450 and ICX 7250 devices. oif-list Shares the Output Interface Lists across entries. all Specifies all types of Output Interface Lists. Global configuration mode The no form of the command disables hardware entry optimization

  • Enabling priority flow control for a single priority group

    Last Updated Sep 03, 2026

    Enabling priority flow control for a single priority group Enabling priority flow control for a single priority group Enabling priority flow control for a single priority group Follow these steps to enable PFC for a single priority group (PG). PFC is supported only on RUCKUS ICX 7250, ICX 7450, and

  • LRM Adapter Support

    Last Updated Sep 02, 2026

    : Link down Amber off, Green on: Link up Amber off, Green blinking: Link activity Panel label SPF+ Optic module with copper pigtail The LRM adapter is used to support LRM optics on the ICX 7750, ICX 7250, and ICX 7150 switches. The ICX 7450 supports LRM optics natively.

  • IPsec Scalability Limits

    RUCKUS ICX FastIron IP Security Deployment Guide

    Last Updated Sep 02, 2026

    IPsec Scalability Limits IPsec Scalability Limits IPsec Scalability Limits The ICX 7450 supports encryption and decryption on the ICX7400-SERVICE-MOD module. Encryption and decryption are hardware-based and are not performed by the software. One ICX7400-SERVICE-MOD module can be installed per

  • non-tpm-switch-cert-validate

    Last Updated Sep 03, 2026

    -switch-cert-validate Enables the certificate validation. Global configuration mode On some ICX 7250, ICX 7450, or ICX 7750 devices, self-signed certificates are used. SmartZone honors these certificates when the non-tpm-switch-cert-validate command is entered on the SmartZone console. This command is