Search Results: "icx 7650"

-defined VRF depends on the platform. Platform Minimum Default Maximum ICX 7250 N/A N/A N/A ICX 7450 128 1024 15168 ICX 7650 64 4096 131072 ICX 7750 64 4096 131072 For ICX 7250, ICX 7450 and ICX 7650 devices, if the maximum number of routes are not configured, the default is considered the maximum

system-max ip6-cache system-max ip6-cache system-max ip6-cache Configures the maximum number of IPv6 cache entries. system-max ip6-cache value no system-max ip6-cache value For ICX 7550 devices, the default number of IPv6 cache entries is 5120. For ICX 7650 devices, the default number of IPv4 cache

user-defined VRF depends on the platform. Platform Minimum Default Maximum ICX 7250 N/A N/A N/A ICX 7450 64 100 5120 ICX 7650 16 1024 7168 ICX 7750 16 1024 7168 For ICX 7250, ICX 7450 and ICX 7650 devices, if the maximum number of routes are not configured, the default is considered the maximum

interface. MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. The pre-shared key is required for communications between MACsec peers. The following example configures MKA group test1 and assigns the MACsec pre-shared key with a name beginning with 96437a93 and with the

of load-sharing paths supported by the Layer 3 device. You can change the maximum number of paths the Layer 3 device supports to a value from 2 through 8. On RUCKUS ICX 7650 and ICX 7850 devices, the value range for the maximum number of load-sharing paths is from 2 through 32. Maximum Number of

. MACsec commands are supported on ICX 7450, ICX 7550, ICX 7650, and ICX 7850 devices. For a MACsec channel to be created between two ports, both ports and devices designated must have MACsec enabled and configured. The enable-mka ethernet command enables MACSec licensing on the specified interface

configuration mode The default VLAN cannot be mapped to a VNI. The maximum number of VLANs in a range is 256. This command is supported for router images only. This command is supported for RUCKUS ICX 7550, ICX 7650, and ICX 7850 devices only. For RUCKUS ICX 7650 and ICX 7850 devices, no more than

MLD snooping group addresses is supported. For ICX 7650 devices, the default maximum number of MLD snooping group addresses is 4096. For ICX 7150 devices, the default maximum number of MLD snooping group addresses is 1024. num Specifies the maximum number of MLD snooping group addresses supported

system-max ip6-cache system-max ip6-cache system-max ip6-cache Configures the maximum number of IPv6 cache entries. system-max ip6-cache value no system-max ip6-cache value For ICX 7550 devices, the default number of IPv6 cache entries is 5120. For ICX 7650 devices, the default number of IPv4 cache

port. MACsec commands are supported only on ICX 7450, ICX 7650, ICX 7850 devices. For a MACsec channel to be created between two ports, both ports and devices designated must have MACsec enabled and configured. The enable-mka ethernet command enables MACSec licensing on the specified interface. If the