Search Results: "icx 7450"

EXEC mode VLAN configuration mode This command is supported only on ICX 7250, ICX 7750, and ICX 7450 devices. This command displays the availability of L2MC group indexes in the hardware and how it is used and shared. The L2MC group index range varies depending on the platform. Values out of range are

-switch-cert-validate Enables the certificate validation. Global configuration mode On some ICX 7250, ICX 7450, or ICX 7750 devices, self-signed certificates are used. SmartZone honors these certificates when the non-tpm-switch-cert-validate command is entered on the SmartZone console. This command is

is disabled by default on ICX 7750 devices, and enabled by default on ICX 7450 and ICX 7250 devices. Hardware entry optimization is enabled by default. oif-list Shares the Output Interface Lists across entries. all Specifies all types of Output Interface Lists. Global configuration mode The no form

supported on the Ruckus ICX 7450, with an FPGA-based add-on crypto card. The following example configures syslog generation for IKEv2 events. device# configure terminal device(config)# logging enable ikev2 The following example configures logging of additional IKEv2 events. device# configure terminal

EXEC mode VLAN configuration mode This command is supported only on ICX 7250, ICX 7750, and ICX 7450 devices. This command displays the availability of L2MC group indexes in the hardware and how it is used and shared. The L2MC group index range varies depending on the platform. Values out of range are

on ICX 7750 devices, and enabled by default on ICX 7450 and ICX 7250 devices. IPMC entry optimization is enabled by default. oif-list Shares the Output Interface Lists across entries. all Specifies all types of Output Interface Lists. Global configuration mode The no form of the command disables

configured for the VTI. ipsec-profile-name Specifies the name of the IPsec profile to secure packets that go out on this interface. Interface configuration mode Before executing this command, the tunnel mode must be set to ipsec by using the tunnel mode ipsec command. IPsec is supported only on ICX

is disabled by default on ICX 7750 devices, and enabled by default on ICX 7450 and ICX 7250 devices. Hardware entry optimization is enabled by default. oif-list Shares the Output Interface Lists across entries. all Specifies all types of Output Interface Lists. Global configuration mode The no form

the default. The following example changes the value for the capacity of the MAC address table to 20000. device# configure terminal device(config)# system-max mac 20000 Release Command History 08.0.40 The command is not valid as you cannot change the number in ICX 7750, ICX 7450, and ICX 7250 devices.

Configures the number of VRF instances supported. Refer to the Usage Guidelines section. Global configuration mode The range of maximum and minimum configurable VRF instance and the default values depends on the platform. Platform Minimum Default Maximum ICX 7250 4 16 16 ICX 7450 4 16 16 ICX 7650