Search Results: "icx 7450"

. MACsec commands are supported on ICX 7450, ICX 7550, ICX 7650, and ICX 7850 devices. MACsec commands are supported on ICX 7550, ICX 7650, and ICX 7850 devices. For a MACsec channel to be created between two ports, both ports and devices designated must have MACsec enabled and configured. The enable-mka

interface. MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. MACsec commands are supported only on ICX 7650 and ICX 7850 devices. The pre-shared key is required for communications between MACsec peers. The following example configures MKA group test1 and assigns the

software images only. Enabling or disabling Layer 2 switching is not supported on virtual interfaces. Ruckus FCX 6430, FCX 6450, FCX 6430-C12, ICX 6450, and ICX 6610 devices support both the ingress and egress L2 traffic suppression on a route-only port. Ruckus ICX 7450, ICX 7250, ICX 7750, and RUCKUS

authenticated MAC sessions per port on various platforms Supported platforms Maximum number of MAC sessions per port when none of the clients has dynamic ACL Maximum number of MAC sessions per port when at least one client has dynamic ACL ICX 7750 1024 32 ICX 7450 1024 32 ICX 7250 1024 32 The system

Port When None of the Clients Has Dynamic ACL Maximum Number of MAC Sessions per Port When at Least One Client Has Dynamic ACL ICX 7850 1024 32 ICX 7750 1024 32 ICX 7650 1024 32 ICX 7550 1024 32 ICX 7450 1024 32 ICX 7250 1024 32 ICX 7150 1024 32 The system limit for authenticated MAC sessions also

. MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. The macsec cipher-suite command can be used in conjunction with an encryption offset configured with the macsec confidentiality-offset command. The following example enables GCM-AES-128 encryption on group test1. device

BGP4+ - IPv6 Border Gateway Protocol BGP4+ - IPv6 Border Gateway Protocol BGP4+ - IPv6 Border Gateway Protocol Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 BGP4+ No No 08.0.20 08.0.95 08.0.70 08.0.90 Configuring BGP4+ Neighbors Using Global or Link-Local IPv6 Addresses No No

Software Upgrade Software Upgrade Software Upgrade Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 System backup to USB 08.0.70 No No 08.0.95 No 08.0.90 Boot from USB 08.0.70 08.0.90 08.0.90 08.0.95 08.0.70 08.0.90 Software upgrade via CLI 08.0.60 08.0.30 08.0.20 08.0.95 08.0.70

RIP - IPv4 Routing Information Protocol RIP - IPv4 Routing Information Protocol RIP - IPv4 Routing Information Protocol For considerations related to RIP in an 802.1BR (SPX) configuration, refer to the Ruckus FastIron Campus Fabric Configuration Guide Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX

Hitless Enable Status = 0 Total number of Switchover/Failovers = 0 L3 slib baseline sync status: 0 [complete] Management redundancy is not available for the ICX 7450-24 platform.