Search Results: "icx 8100"

ICX 7650 08.0.80a - ICX 7750 08.0.80a 08.0.95 and subsequent patches ICX 7850 08.0.90 - ICX 7850-48C 09.0.10a - ICX 8100-24, -24P, -48, -48P, -C08PF 10.0.10f_cd1 - ICX 8100-24-X, -24P-X, -48-X, -48P-X, -C08PF-X 10.0.10g_cd1 - ICX 8100-48PF, -48-PF-X, 16PF-X, 16PF, -C16P, -C16P-X 10.0.10h_cd1 - ICX

because we do not double tag; instead, we replace the VLAN tag. Typically, the same VLAN mapping configuration must be done for all the edge ports to the same customer. This feature is supported on all the existing ICX hardware platforms. For ICX 8100 and ICX 8200 devices, VLAN translation is

Enhancements in FastIron Release 10.0.20b_cd1 Feature Description Described in Introduction of RUCKUS ICX 8100 support Support for RUCKUS ICX 8100 devices is introduced. Stacking, Licensing, BGP4, BGP4+, GRE Tunnels, IP MAC addresses, MTU, Multi-VRF, OSPFv2, OSPFv3, PBR, RIPv1, RIPv2, RIPng, TCP MSS, uRPF

range that is a member of a VLAN group or any reserved VLAN. Otherwise, configurations fail on the entire range. ACLs are supported on member ports of a VLAN on which DHCPv6 snooping is enabled. Refer to About client IP-to-MAC address mappings for more information. On ICX 8100 and ICX 8200 devices

source IP address can be any IP on the router. This command is not supported for ICX 8100 devices. The no form of the command removes the IP address from the monitor profile. The following example sets the source IP address in ERSPAN profile 3. device# configure terminal device(config)# monitor

the feature. For example, OpenFlow is only supported on ICX 7150, ICX 7650, ICX 7850, and ICX 8200. So the table does not have columns for ICX 7150-ES, ICX 7550, or ICX 8100. The values in this guide list the verified scalability limits for ICX switches. The limits provided in this guide focus on

should deploy this point-to-point tunneling mechanism if you need a permanent and stable connection. ICX 8100 devices do not support tunnels. The no form of the command removes the configured tunnel mode. The following example configures the tunnel mode as a manual IPv6 tunnel. device# configure

NTP - Network Time Protocol NTP - Network Time Protocol NTP - Network Time Protocol Feature ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 Network Time Protocol Version 4 (NTP) 08.0.60 10.0.10d 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 System clock 08.0.60 10.0.10d 08.0.95 08.0.70

VRRPv2 - Virtual Router Redundancy Protocol Version 2 VRRPv2 - Virtual Router Redundancy Protocol Version 2 VRRPv2 - Virtual Router Redundancy Protocol Version 2 Feature ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 Virtual Router Redundancy Protocol (VRRP) 08.0.61 No 08.0.95

Stacking power supply table Stacking power supply table Stacking power supply table The following table shows the status of a power supply on devices that support the stacking functionality. ICX 8100 models do not support stacking. Name, OID, and syntax Access Description snChasPwrSupply2Table