Search Results: "icx 7750"

IPv4 Multicast Routing IPv4 Multicast Routing IPv4 Multicast Routing Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX 7850 Passive multicast route insertion (PMRI) 8.0.61 8.0.40 8.0.20 8.0.95 8.0.70 8.0.10 8.0.90 IP Multicast Boundaries 8.0.61 8.0.40 8.0.20 8.0.95 8.0.70 8.0.10

show bfd counters show bfd counters show bfd counters Displays Bidirectional Forwarding Detection (BFD) counters. show bfd counters User EXEC mode This command is supported for Ruckus ICX 7750 and ICX 7850 devices. This command is supported for ICX 7850 devices only. The following example shows

and IFG bytes to be added to egress shaping in the range 1 through 127. Global configuration mode This command is supported on Ruckus ICX 7150, ICX 7250, ICX 7450,, ICX 7650, and ICX 7750 devices. This command is supported on ICX 7150, ICX 7650, and ICX 8100 devices only. It is recommend to use a

and IFG bytes to be added to egress shaping in the range 1 through 127. Global configuration mode This command is supported on Ruckus ICX 7150, ICX 7250, ICX 7450,, ICX 7650, and ICX 7750 devices. For the ICX 7650, we recommend using a value greater than or equal to 20 bytes. The no form of the

all Hardware entry optimization is disabled by default on ICX 7750 devices and enabled by default on ICX 7450 and ICX 7250 devices. oif-list Shares the Output Interface Lists across entries. all Specifies all types of Output Interface Lists. Global configuration mode The no form of the command

filtering to the CPU for a VLAN is disabled.. Global configuration mode The command is applicable for ICX 7650 and ICX 7750 devices only. After using this command a reload may be required. If a reload is required, this requirement appears after the command is executed. The no form of the command

all IPMC entry optimization is disabled by default on and ICX 7750 devices, and enabled by default on ICX 7450 and ICX 7250 devices. oif-list Shares the Output Interface Lists across entries. all Specifies all types of Output Interface Lists. Global configuration mode The no form of the command

[ details ] [ ip-address | ipv6-address ] ] ipv6-address Specifies an IPv6 address. bgp Specifies BGP information. details Specifies detailed information. ip-address Specifies an IP address. ospf6 Specifies OSPFv3 information. User EXEC mode This command is supported for Ruckus ICX 7750 and ICX 7850

IPv6 host address. device# configure terminal device(config)# snmp-server host ipv6 2001:DB8:89::13 mypublic port 200 device(config)# write memory device(config)# snmp-client ipv6 2001:DB8:89::23 device(config)# snmp-server trap-source ethernet 1/2/1 device(config)# snmp-server enable traps holddown-time 40 The following RUCKUS ICX devices support IPv6 for SNMPv3: ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, ICX 7750, and ICX 7850

commands in both stacking and standalone systems. On Ruckus ICX 7750 devices, scheduler profiles are applied at the port, rather than at the device (port region), level. See the description of the scheduler-profile command In the Ruckus FastIron Command Reference for more information.