⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

Search Results: "icx 7450"

Showing 311 - 320 of 1,228 results

Relevance: best match to your search term first.

  • ethernet loopback test-mac

    Last Updated Sep 03, 2026

    , ICX 7450 and ICX 7250 devices before enabling Ethernet loopback. You must configure the ethernet loopback test-mac command on ICX 7450 and ICX 7250 devices before enabling Ethernet loopback. In other supported platforms, configure the ethernet loopback test-mac command only if you require the port to

  • pre-shared-key

    Last Updated Sep 03, 2026

    interface. MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. The pre-shared key is required for communications between MACsec peers. The following example configures MKA group test1 and assigns the MACsec pre-shared key with a name beginning with 96437a93 and with the

  • ethernet loopback test-mac

    Last Updated Sep 03, 2026

    , ICX 7450 and ICX 7250 devices before enabling Ethernet loopback. You must configure the ethernet loopback test-mac command on ICX 7450 and ICX 7250 devices before enabling Ethernet loopback. In other supported platforms, configure the ethernet loopback test-mac command only if you require the port to

  • enable-mka

    Last Updated Sep 03, 2026

    . MACsec commands are supported on ICX 7450, ICX 7550, ICX 7650, and ICX 7850 devices. For a MACsec channel to be created between two ports, both ports and devices designated must have MACsec enabled and configured. The enable-mka ethernet command enables MACSec licensing on the specified interface

  • enable-mka

    Last Updated Sep 03, 2026

    port. MACsec commands are supported only on ICX 7450, ICX 7650, ICX 7850 devices. For a MACsec channel to be created between two ports, both ports and devices designated must have MACsec enabled and configured. The enable-mka ethernet command enables MACSec licensing on the specified interface. If the

  • ipv6 multicast mcache-age

    Last Updated Sep 03, 2026

    for ICX 7750, ICX 7450, and ICX 7250 devices. num Specifies the time, in seconds, the device should wait before stopping traffic to a port when a leave message is received The range is 60 through 3600 seconds. Global configuration mode The no form of this command restores the default mcache age-out

  • pre-shared-key

    Last Updated Sep 03, 2026

    command was introduced. 08.0.30 Support for this command was added on ICX 7450 devices. 08.0.70 Support for this command was added on ICX 7650 devices. 08.0.90 Support for this command was added on ICX 7850 devices.

  • Software Image File Types

    RUCKUS FastIron Monitoring Configuration Guide, 09.0.10

    Last Updated Sep 03, 2026

    are applicable to the listed devices only and are not interchangeable. Software Image Files Product Boot Image Flash Image ICX 7250 ICX 7450 spzxxxxx.bin SPSxxxxx.bin (Layer 2) or SPRxxxxx.bin (Layer 3)

  • VRP - VLAN Registration Protocol (includes MVRP)

    Last Updated Sep 03, 2026

    ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX 7850 MVRP - Multiple VLAN Registration Protocol 8.0.90 8.0.90 8.0.90 8.0.95 8.0.90 8.0.90 8.0.90 MVRP with Per-VLAN STP and Per-VLAN RSTP 8.0.95 8.0.95 8.0.95 8.0.95 8.0.95 8.0.95 8.0.95

  • RIP - IPv4 Routing Information Protocol

    Last Updated Sep 03, 2026

    RIP - IPv4 Routing Information Protocol RIP - IPv4 Routing Information Protocol RIP - IPv4 Routing Information Protocol Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 RIP V1 and V2 RIP is included with the PREM license. RIP is included with the PREM license. 08.0.61 08.0.30 08.0.20