Search Results: "icx 8100"

ICX 8100 and ICX 8200 devices. The following example shows the DHCPv6 snooping learned entries. device# show ipv6 dhcp6 snooping info Dhcp snooping Info Total Learnt Entries 1 Learnt DHCPv6 Snoop Entries IPv6 Address Mac Address Valid-Time Preferred-Time Port/Lag Vlan VRF 2001::5 00c5.0600.0001 2753

the default, maximum, and minimum allocations. If you disable IPv6 routing, the TCAM space allocations do not change. If you want to allocate the maximum possible space for IPv4 routing information, you must configure the TCAM space manually. For ICX 8100 devices, only the default static route is

ICX 8100 and ICX 8200 devices and a maximum of 72 VLANs for other ICX devices can be mirror-filtered, contingent on TCAM availability. If the RSPAN destination uplink is the same as the forwarding path, the number of mirror traffic sources configured should be appropriate to the bandwidth available

ICX 8100 and ICX 8200 devices and a maximum of 72 VLANs for other ICX devices can be mirror-filtered, contingent on TCAM availability. If the RSPAN destination uplink is the same as the forwarding path, the number of mirror traffic sources configured should be appropriate to the bandwidth available

device you are configuring. Refer to VLAN and VPORT Support for ICX 7150, ICX 7550, ICX 7650, ICX 7850, ICX 8100, and ICX 8200 . The system-max default VLAN is increased from 64 to 4024. Hence the default VPORT limit is no longer equal to the default MAX VLAN setting. Increase the maximum number of

devices, valid values range from 256 through 8192. For ICX 7150 devices, valid values range from 256 through 3072. For ICX 8100, ICX 8200, ICX 7850, and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the

ip icmp icmp-fragments ip icmp icmp-fragments ip icmp icmp-fragments Drops ICMP packet fragments. ip icmp icmp-fragments no ip icmp icmp-fragments By default, the ICMP packet fragments are not dropped. Global configuration mode This command is supported for RUCKUS ICX 8200 and ICX 8100 devices only

interface Flags : MV-R - MVR Receiver, MV-S - MVR Source ---------+---------------+----+---+ Interface|Local |Mode|St | |Address | | | ---------+---------------+----+---+ v1 * MV-S Ena v2 * MV-S Ena v10 * MV-R Ena v11 * MV-R Ena Total Number of Interfaces : 4 Release version Command history 09.0.10a This command was introduced. 10.0.10h This command is supported for ICX 8100 devices.

command is supported for RUCKUS ICX 8200 and ICX 8100 devices only. The show statistics dos-attack icmp fragments command displays the following information: The following example displays output of the show statistics dos-attack icmp fragments command. device# show statistics dos-attack icmp fragments

ip icmp icmp-fragments ip icmp icmp-fragments ip icmp icmp-fragments Drops ICMP packet fragments. ip icmp icmp-fragments no ip icmp icmp-fragments By default, the ICMP packet fragments are not dropped. Global configuration mode This command is supported for RUCKUS ICX 8200 and ICX 8100 devices only