-
Last Updated
Aug 20, 2026
RUCKUS ICX Switches
Product Guides
Configure and Deploy
............................................................................................................................................................................23 ICX 7150 and ICX 7250 PoD licenses................................................................................................................................................23 Converting ICX 7150 or ICX 7250 1-Gbps SPX links to 10-Gbps links
-
Last Updated
Aug 25, 2026
RUCKUS ICX Switches
Product Guides
Administer and Manage
• Ruckus ICX 7750 Series • Ruckus ICX 7650 Series • Ruckus ICX 7450 Series • Ruckus ICX 7250 Series • Ruckus ICX 7150 Series NOTE ICX 7150-C08PT devices do not support web management for FastIron release 08.0.92, with the exception of the ability to enable HTTP and HTTPS services (disabled by default
-
deny (Extended IPv4 ACLs and IPv6 ACLs)
Last Updated
Sep 03, 2026
for ICMP protocol and ICMP message type: dscp-marking dscp-matching On RUCKUS ICX 7150 devices, ACL logging is not supported for egress ACLs. On RUCKUS ICX 7150 and RUCKUS ICX 7750 devices, ACL logging is not supported for egress ACLs. When specifying type of service (ToS), you can indicate multiple
-
deny (Extended IPv4 ACLs and IPv6 ACLs)
Last Updated
Sep 03, 2026
for ICMP protocol and ICMP message type: dscp-marking dscp-matching On RUCKUS ICX 7150 and RUCKUS ICX 7750 devices, ACL logging is not supported for egress ACLs. On RUCKUS ICX 7150 devices, ACL logging is not supported for egress ACLs. When specifying type of service (ToS), you can indicate
-
Last Updated
Sep 03, 2026
RUCKUS ICX Switches
Product Guides
Configure and Deploy, Administer and Manage, Monitor and Report
Port to the Egress Queue Drop Counters Configuring a Port to the Egress Queue Drop Counters The ICX 7150 and ICX 7150-ES models have only one set of egress queue drop counters and can monitor only one port for the incrementing of the counters. By default, the device monitors the local CPU port for
-
Converting a stack to a PE chain or ring
Last Updated
Sep 03, 2026
the procedure uses the SPX interactive-setup utility, the zero-touch utility must be disabled. To convert an existing ICX 7150, ICX 7250, or ICX 7450 stack to a PE chain or ring, you must first dismantle the entire stack by issuing the erase startup-config command and then the reload command without
-
Converting a Stack to a PE Chain or Ring
Last Updated
Sep 03, 2026
the procedure uses the SPX interactive-setup utility, the zero-touch utility must be disabled. To convert an existing ICX 7150, ICX 7250, or ICX 7450 stack to a PE chain or ring, you must first dismantle the entire stack by issuing the erase startup-config command and then the reload command without
-
Priority Flow Control
Last Updated
Sep 03, 2026
because the port pause capabilities must be advertised and negotiated again with the peer. Ports with auto-negotiation disabled do not experience flapping. PFC Support on ICX Devices RUCKUS ICX 7150 devices: Priority flow control (PFC) is not supported. RUCKUS ICX 7250 devices: Symmetrical flow
-
Last Updated
Sep 21, 2026
clock parameters for the device The date and time values set on a device are used for logging, error detection, and troubleshooting. ICX devices have the capability to retain date and time programmed in Real Time Clock(RTC) register even when power is removed from the device. However, ICX 7150 and ICX
-
sequence (permit | deny in IPv6 ACLs)
Last Updated
Sep 03, 2026
sequence values determines the order of rule processing. If you do not specify a sequence value, the rule is added to the end of the list. Such a rule is automatically assigned the next multiple of 10 as a sequence number. On RUCKUS ICX 7150 and ICX 7750 devices, ACL logging is not supported for