-
Last Updated
Sep 03, 2026
RUCKUS ICX Switches
Product Guides
Configure and Deploy, Administer and Manage, Monitor and Report
Supported by Campus Fabric Campus Fabric cannot be implemented on certain topologies. Topologies Handled by Zero-touch or SPX Interactive-setup Topologies Handled by Zero-touch or SPX Interactive-setup ICX 7150 devices, ICX 7250 devices, ICX 7450 devices, or any combination can be discovered and
-
Last Updated
Sep 03, 2026
RUCKUS ICX Switches
Product Guides
Configure and Deploy, Administer and Manage, Monitor and Report
supported by Campus Fabric Campus Fabric cannot be implemented on certain topologies. Topologies handled by zero-touch or SPX interactive-setup Topologies handled by zero-touch or SPX interactive-setup ICX 7150 devices, ICX 7250 devices, ICX 7450 devices, or any combination can be discovered and
-
Using Zero-touch to Add PE Units
Last Updated
Sep 03, 2026
clean units. On the local console of each ICX 7150, ICX 7250, or ICX 7450 unit, enter the following. Device# erase startup-config ! ! Device# reload ! ! When the system asks wether to reload without saving the configuration enter y. Attach clean ICX 7150, ICX 7250, or ICX 7450 units to the existing
-
Using zero-touch to add PE units
Last Updated
Sep 03, 2026
clean units. On the local console of each ICX 7150, ICX 7250, or ICX 7450 unit, enter the following. Device# erase startup-config ! ! Device# reload ! ! When the system asks wether to reload without saving the configuration enter y. Attach clean ICX 7150, ICX 7250, or ICX 7450 units to the existing
-
show stack
Last Updated
Sep 03, 2026
not display the transition after bootup of a non-active controller unit from member to standby. The following example displays information for an ICX 7150 three-unit stack. The command includes information on topology. The stack shown is configured in a ring with trunks between units 1 and 2 and
-
Policy-Based Routing Overview
Last Updated
Sep 03, 2026
an IP packet. The ACLs classify the traffic and the route maps that match on the ACLs set routing attributes for the traffic. PBR is not supported on ICX 7150-ES and ICX 8100 devices. A PBR policy specifies the routing attributes for traffic that matches the policy. Using standard ACLs with route
-
show stack
Last Updated
Sep 03, 2026
not display the transition after bootup of a non-active controller unit from member to standby. The following example displays information for an ICX 7150 three-unit stack. The command includes information on topology. The stack shown is configured in a ring with trunks between units 1 and 2 and
-
Software licensing
Last Updated
Sep 03, 2026
Software licensing Software licensing Software licensing The following table contains information about the software licenses configured on the device. License is not supported on ICX 7150-ES and ICX 8100 devices. Name, OID, and syntax Access Description fdryLicensePackageName
-
Configuring Remote Access Using Telnet
Last Updated
Sep 03, 2026
the device but is not being used to send data. When the cli timeout command is configured with a value of 0, no timeout occurs, and the session remains up. RUCKUS ICX 7150 devices support five inbound Telnet sessions and five outbound Telnet sessions. There is no Telnet-specific username and password
-
Entity MIBs
Last Updated
Sep 03, 2026
.1.17.1.12.10 brcdEntityOIDCpuPPC8572 brcdIp.1.17.1.12.11 brcdEntityOIDCpuPPC8572E brcdIp.1.17.1.12.12 History Release version History 08.0.50 This MIB was introduced. 08.0.60 Introduced ICX 7150 Entity OIDs. 08.0.70 Introduced ICX 7650 Entity OIDs. 08.0.90 Introduced ICX 7850 Entity OIDs. 08.0.95 Introduced ICX 7550 Entity OIDs.