Search Results: "icx 7850"

traffic, use the enable egress-acl-on-cpu-traffic command. CPU traffic on standby and member units in ICX 7150, ICX 7550, ICX 7850, and ICX 8200 stacks is, by default, subjected to outbound ACL filtering. In contrast, ICX 7150, ICX 7550, ICX 7850, ICX 8100, and ICX 8200 standalone devices and stack

supported for LAG interfaces. Micro-BFD is only useful for point-to-point LAG interfaces. This command is supported for Ruckus ICX 7750 and ICX 7850 devices. This command is supported for ICX 7850 devices only. The no form of the command disables micro-BFD sessions for the LAG interface. The following

. Port: Specifies the port number in the slot. Specifying Data Port Address ICX Devices Unit/Slot/Port ICX 7850, ICX 7650, ICX 7550, ICX 7450, ICX 7250, ICX 7150 1/1/1 to 1/1/24 or 1/1/48 Specifying Stacking Port Address ICX Devices Unit/Slot/Port ICX 7850, ICX 7650, ICX 7550, ICX 7450, ICX 7250, ICX 7150 1/1/1 to 12/1/1 Specifying Management Port The management port number is always 1.

Valid Number of Ports in a Group Static LACP ICX 8100 ICX 8200 128 128 1 to 8 The ICX 8100 and ICX 8200 can scale up to 1024 LAG ports and are also limited to the number of ports on the device. ICX 7550 ICX 7650 ICX 7850 256 256 1 to 16 The ICX 7550, ICX 7650, and ICX 7850 devices can scale up to a maximum of 2048 LAG ports.

supported for LAG interfaces. Micro-BFD is only useful for point-to-point LAG interfaces. This command is supported for Ruckus ICX 7750 and ICX 7850 devices. This command is supported for ICX 7850 devices only. The no form of the command disables micro-BFD sessions for the LAG interface. The following

Valid Number of Ports in a Group Static LACP ICX 7150 128 128 1 to 8 The ICX 7150 can scale up to 1024 LAG ports and are also limited to the number of ports on the device. ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX 7850 256 256 1 to 16 The ICX 7250, ICX 7450, ICX 7550, ICX 7650, OCX 7750 and ICX 7850 devices can scale up to a maximum of 2048 LAG ports.

. Port: Specifies the port number in the slot. Specifying Data Port Address ICX Devices Unit/Slot/Port ICX 7850, ICX 7750, ICX 7650, ICX 7550, ICX 7450, ICX 7250, ICX 7150 1/1/1 to 1/1/24 or 1/1/48 Specifying Stacking Port Address ICX Devices Unit/Slot/Port ICX 7850, ICX 7750, ICX 7650, ICX 7550, ICX 7450, ICX 7250, ICX 7150 1/1/1 to 12/1/1 Specifying Management Port The management port number is always 1.

is from 0 through 3. Global configuration mode This command is supported only on Ruckus ICX 7250, ICX 7450, and ICX 7850 devices. To enable global PFC, symmetrical flow control (SFC) must be disabled. You must enable PFC globally before you configure it for priority groups. Enabling PFC on a

ICX7150-C12P FJA BR-ICX-7150Z210U810R-P-01 ICX 7150-48ZP, Z-Series switch from 6x1G SFP and 2x10G SFP+ to 8x10G SFP+ uplink ports and the full Layer 3 Premium feature capabilities ICX7150-48ZP FJU ICX-MACSEC-LIC ICX MACSec License ICX 7550 ICX 7650 ICX 7850 DBJ ICX7550-PREM-LIC ICX 7550 Layer 3

supported on per priority level for ICX 7550 and ICX 7850 devices only. Flow control enables feedback from a receiver to its sender to communicate buffer exhaustion and buffer availability. A receiver generates a MAC control frame and sends a PAUSE request to a sender when a specified threshold (Xoff